Light Weight ASA MaterialEmboss Surface Syntheticr Resin Roof
Tile10-30 Years of Warranty
Synthetic Resin Roof Tile choose the high quality pvc resin as the
surface material so that
to keep the balance from the weather changes.The products keep the
fresh color and good
physical stability between the shift of strong sun burst and
humidity and humidity and
situations.According to the 10000 hours artificial aging test that
calculated the use time equal
28 years under the sun light.
Product detail:
| length | customized(according the pitch of 219mm) |
| width | overall width 1050 mm effective width 960mm |
| thickness | 2.3MM | 2.5MM | 3.0MM |
| weight | 5.0±0.1kg/m2 | 5.6±0.1kg/m2 | 6.0±0.1kg/m2 |
Product performance:
The advantages of the composite plastic tile
1. Light mass, heat insulation, thermal insulation, moisture proof,
flame retardant, isolation, acid and alkali resistance and
resistant to corrosion.
2. Stability, good dielectric properties, durability, anti-aging,
uvioresistant, anti-tensile and lower noise.
3. Strong flexural strength and impact toughness, the extension is
higher when crack.
4. Surface is smooth, bright in color, fastness, non contain
asbestos, widely decoration application, highly decorative, which
is a new kind of environmental protection material.
5. Construction process is simple, low cost of transportation,
installation is more convenient.
Application:
| Mobile homes | residentia | bus station |
| Garden Pavilion | temporary housing | train station |
| Villa | stage design | Building decoration |
Test Report:
| Item | Content | | Result | Standard |
| Environment | Pollution or environment friendly | No asbestos and Environment friendly Recycling material | GB6566-2001, A standard good for Environment |
| Heat distortion temperature | Under 70.0°C | No change | GB/T1634-2004 |
| Vicat softening temperature | Under 75.2°C | No Softening | GB/T1633-2000 |
| Hard to burn | B1 Grade | Oxygen index:35 | GB/T2406-1993 |
| Vertical Burning | FV-0 | FV-0 | GB/T2408-1996 |
| horizontal Burning | FH-1 | FH-1 | GB/T2408-1996 |
| Impact Resistance | no crack | 0/10 | GB/T8814-2004 |
| Density | 1.75-1.95 | 1.79 | GB/T1033-1986 |
| Corrosion-resistant | Acid (HCL,H2SO4,HNO3)5% | No change | QB/T3801-1999 |
| Corrosion-resistant | Alkaline(NaOH)5% | No change | QB/T3801-1999 |
