7 degree 11 degree 12 degree 34mm 36mm 38mm 40mm Chisel Drill Bit
for Hex22 Shank Rod
Our drill bits are made with high quality alloy steel bar and tungsten carbides, through heat treatment.
Caracteristique:
(1)Button bit taper angle: 4°,4°46″,6°,7°,11°,12°
(2)Models:chisel bit/cross bit/button bit
(3)Diam:20-45 mm
(4)Button bit shape:spherical/parabolic
(5)Socket inside diameter:15/19/22/25(mm)
Application
Widely used in drilling holes with depth less than 5 meters and diameter ranged in 20-45 mm by light-duty rock drill, like Y6.
What can you get from KSQ?
1. Good service for the products purchased
2. Good quality control of products produced
3. Reasonable prices for the products offered
4. Best advices based on the experience and knowledge of well know
what to do and how to do
Product Codes System:
Tapered Button Bits:
BS432-7D-(22)(23)
BS = Button Bit, Short Skirt
4 = Number of Tungsten Carbide Inserts
32 = Bit Diameter in mm
---
7D = 7 Degrees Taper
---
(22) (23) = Bit Inside Diameter in mm, specific for Tapered Rod
Diameter
| Tapered Chisel Bits:
C26-7D-(22)(23)
C = Chisel Bit
26 = Bit Diameter in mm
---
7D = 7 Degrees Taper
---
(22) (23) = Bit Inside Diameter in mm, specific for Tapered Rod
Diameter
|
Tapered Cross Type Bits:
CR(S)45-H25
CR = Cross Type Bit, Tungsten Carbide Inserts
CRS = Cross Type Bit, Steel Inserts
64 = Bit Diameter in mm
---
H25 = Thread System
Tapered Drill Rods:
H22-7D-600
H22 = Hex 22 mm Tapered Rod
---
7D = 7 Degrees Taper
---
600 = Effective Drill Rod Length in mm
|
|
Product Description
Tapered button bit to drill quarry granite rock
Bit diameter: 32mm to 42mm
Body height: 50mm, 55mm,60mm
Taper/Grade: 6 degree, 7 degree, 11 dregree, 12 degree
Shank Diameter: for Hex22 tapered rod
Description | Diameter | Length | Water hole |
Taper degree: 4°, 6°, 7°, 11°, 12°
Socket inside d=15,19,22,25mm 
| mm | mm | 2 |
20 | 65 | 2 |
23 | 65 | 2 |
25 | 69 | 2 |
28 | 60 | 2 |
30 | 55 88 | 2 |
32 | 55 64 71 80 | 2 |
34 | 71 80 | 2 |
36 | 74 | 2 |
38 | 74 | 2 |
40 | 74 | 2 |
42 | 74 | 2 |
45 | 74 | 2 |
Related productions
Taper button bit - For 22 mm (7⁄8") hex. Rod |
| Bit Diameter | mm | 32 | 33 | 34 | 35 | 36 | 38 | 40 | 42 |
inch | 1 1/4 | 1 2/7 | 1 1/3 | 1 3/8 | 1 3/7 | 1 1/2 | 1 4/7 | 1 2/3 |
| Tungsten Carbide Button Number | 4, 6, 7 |
Taper/Grade | 6,7,11,12 degree |
drill bit | broca | broca | foret | Bohrer | matkap ucu | punta da
trapano | boorpunt | jesie | boret drill bit | broca | broca |
foret | Bohrer | matkap ucu | punta da trapano | boorpunt | jesie |
boret tapered tungsten carbides knock off drill bit
Wooden box Package:
Other products related:
(1) Integral Drill Rod– chisel bit integral rod, plug hole integral drill steel,
Shank H19 x 108mm and H22 108mm.
(2) Tapered Rock Drill Tools - chisel bit, cross bit, button bit, drill rod of taper 7, 11, 12
degree
(3) Threaded Rock Drill Tools - button bit, retrac button bit, drop center button bit, dome bit,
reaming bit,extension rod, MF-Rod, Hex rod, coupling sleeve,
crossover coupling of thread R25, R28, R32, R38, T38, T45, T51,
ST58, ST68.
(4) Shank Adapters (Striking Bars) - equivalent to Atlas Copco, , Furukawa, Gardner Genver, Ingersoll
Rand etc.
(5) Down-the-hole (DTH) Bits & Hammers - 3'', 4'', 5'', 6'', 8'', 10", 12" hammers and DTH button bits
(diameter 80mm - 445mm)
