Material Propeties:
usually does not need to be solution heat treated after welding and
has vastly improved fabricability, excellent resistance to
localized corrosion and to both oxidizing and reducing media.
Resists formation of grain-boundary precipitates and is therefore
suitable for chemical process applications in the as-welded
condition. C-276 has excellent resistance to strong oxidizers like
ferric and cupric chlorides, hot contaminated media (organic and
inorganic), chlorine, formic and acetic acids, acetic anhydride,
seawater, brine solutions, sulfur compounds, wet chlorine gas,
hypochlorite and chlorine dioxide.
Description & Name: Hastelloy C276 seamless pipe/tube UNS N10276 Nickel alloy seamless
pipe ASTM B622
Standard: ASTM/ASME B/SB 622
Material: Hastelloy C276 ( UNS N10276 ), Hastelloy B-2 (UNS N10665),Inconel 600,625,617,690,693, Monel 400, Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28,AL6XN,N08028 etc.
| UNS N10276 Chemical Composition wt% |
| Alloy Designation | Element | C | Ni | Cr | Mn | Fe | Si | Co | P | S | Mo | V | W |
| HASTELLOY C276 | Min. % | - | REMAINDER | 14.5 | - | 4 | - | - | - | - | 15 | - | 3 |
| Max. % | 0.01 | REMAINDER | 16.5 | 1 | 7 | 0.08 | 2.5 | 0.04 | 0.03 | 17 | 0.35 | 4.5 |
| Mechanical Propeties | Hastelloy C276 |
| Density: | 8.9 g/cm3 |
| Melting Point: | 1325-1370°c |
| Tensile Strength Min.(Mpa): | 690 |
Yield Strength Min. (MPa):
0.2% offset | 283 |
| Elongation A 5%(min.): | 40 |
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both
end
Packing: Bare packing/bundle packing with woven bag/wooden or steel frame
crate packing/plastic cap protection at the both sides of tubes and
suitably protected for sea-worthly delivery or as requested.
Inspection and Test Procedure
| 1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material |
| 2.100% Dimension & Visual Examination |
| 3. Mechanical Properties Test Include Tension Test,Flaring Test
(For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube),
Hardness Test ,Reversed Flattening Test |
| 4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
| 5.Radiographic Test for Welded Pipe (shall be accordance with
specification,or shall be as agreed upon between the purchaser and
vendor) |
| 6.Straightness Test (optional) |
| 7.Roughness Test (optional) |
| 8.Intergranular Corrosion Test(optional) |
| 9.Impact Test (optional) |
| 10.Grain Size Determinations (optional) |
| NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS
ACCORDING TO STANDARD AND SPECIFICATION. |
