Heating and Cooling Thermal Shock high-low temperature testchamber
Application:
Temperature humidity chamber is used to test various types of
materials for their tolerances of heat, cold, dry, humidity. It is
applied for quality inspection for all types of electronic
products,
electric appliance, and products from communication, instrument,
automobile, plastic, metal, food, chemical, building materials,
medical and aerospace industries.
Dimension about temperateure test chamber:
1.Interior Dimension : W500xH600xD500 (mm)
2.Exterior Dimension : W1050xH1750xD1050(mm)
Temperature Range with temperature test chamber :
1.Temperature: 25℃ ～ 150℃ (adjustable)
2.Humidity: 20% ～ 98% R.H . (adjustable)
temperature rising falling speed rate:
1. temperature rising speed: approx.0.1~3.0℃/min no-linear control
without load
2. temperature falling speed: approx.0.3~1.0℃/min no-linear control
without load
Machine accuracy about temperature humidity test chamber:
1.Analytic accuraty:
Temperature: 0.1 ℃
Humidity : 0.1 %
2.Control accuracy :
Temperature ± 0.5℃
Humidity : ±2.5%RH
3.Distribution uniformity:
Temperature:±2℃
Humidity:±3.0%
Technical Parameters for temperature humidity test chamber :
| Model | TH-80(A~F) | TH-150(A~F) | TH-225(A~F) | TH-408(A~F) | TH-800(A~F) | TH-1000(A~F) |
Internal Dimension
WxHxD (mm) | 400x500x400 | 500x600x500 | 600x750x500 | 600x850x800 | 1000x1000x800 | 1000x1000x1000 |
| Internal Dimension WxHxD (mm) | 950x1650x950 | 1050x1750x1050 | 1200x1900x1150 | 1200x1950x1350 | 1600x2000x1450 | 1600x2100x1450 |
| Temperature Range | Low Temperature(A:25℃ B:0℃ C:-20℃ D:-40℃ E:-60℃ F:-70℃)
High Temperature 150℃ |
| Humidity Range | 20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is a special optional
condition, need Dehumidifier) |
Analytic Accuracy/
Distribution uniformity
of temperature
and humidity | 0.1℃; 0.1% R.H/±2.0℃; ±3.0% R.H. |
| Control Accuracy of Temperature and Humidity | ±0.5℃; ±2.5% R.H. |
| Temperature Rising/Falling Speed Rate | Temperature rising approx. 0.1~3.0℃/min temperature falling approx. 0.1~1.5℃/min; ( The Falling Speed Rate Min.1.5℃ per minute is a special optional
condition) |
| Humidity control range |  |
| Inner and Outer Material | Material of the inner box is SUS 304# stainless steel, of the outer
box is stainless steel or SEE cold-rolled steel with paint coated. |
| Cooling System | Wind cooling or water cooling/single segment compressor(-40℃,
double segment compressor -70℃) |
| Protection Devices | Fuse-free switch, overloading protection switch for compressor,
high and low voltage coolant protection switch, over-humidity and
over-temperature protection switch, fuses, fault warning system,
water short storage warning protection |
| Optional Accessories | Inner door with operation hole , Recorder, Water Purifier,
Dehumidifier |
| Compressor | French Tecumseh Brand,Germany Bizer Brand |
| Power | AC220V 1ph 3 lines, 50/60HZ , AC380V 3ph 5 lines , 50/60HZ |
| Approx. Weight (Kg) | 150 | 180 | 250 | 320 | 400 | 450 |
Control system:
1.Imported LCD display screen, capable of displaying the measured
value as well as the set value and time. 2.Fixed condition or
programmable condition can be set. 3.Fixed condition setting time
range: 0 - 99 H 59 MIN . 4.Programmable mold can set 100 different
programe at the same time, each programe can set serverial
segement to do cycle testing
5.Each prgrame can have max.100 segement with different temperature
setting,segement runing time
Max.59 H99M , Max.can do 999 times cycle. 6.With power off memory
device, reply message to continue with the rest of the program.
7.The control unit has the functions of multiples segment program
editing, and of quick or slope control of
temperature and humidity. 8.With TIMER SIGNAL OUTPUT RELAY.
9.Temperature sensor adopt DIN PT-100Ω
10. Adpot BTHC system to control temperature and humidity , P.I.D.
control S.S.R.. 11.With P.I.D. auto calculate funtion. 12. With
alarm function when runing or setting fault. 13. 5 years memory
back up device while power off
14.With LOCK function for interface. 15.Recorder is optional
FAQ:
1. Are your company a trading one or a factory?
Factory ,28 years focusing on test instruments field,4 years
exporting experience.
2. After an order is placed, when to deliver?
Generally about 20 workdays, If we have finished products, we can
arrange shipment within 3 workdays.
Please be aware that our production lead times depend on specific
items and item quantities.
3. What about the warranty with after - sales services?
12 months warranty.
After the warranty, the professional after-sale service team will
provide perfect technical support,and help customer solve problems
encountered while using our product, handles guest problems and
complaints in a professional and timely.
4. What about the services and product' quality?
Service: OEM service,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality
examination and test, the finished products must through a third
party calibration institutions before shipping and delivery goods.
5. How to install and training?
If the products is easy to install and training, customers can
learn the operation and maintenance manual to installation and use.
If the products is hard to use, customers can come ASLi factory to
learn how to installation and use. And our engineers have a
passport, we can go to overseas.
6.What's your main products?
Environmental chambers, temperature (humidity) chamber, PCT /Hast
chamber (Highly accelerated stress test chamber),ESS chamber, Walk
in stability chamber,Vacuum oven,Altitude chamber,vibration test
system, mechanical shock tester,environmental combined vibration
chamber,etc.
Any inquiries please feel free to contact us !
