Fully welded Hot dipped galvanised strong cattle access grid steel
with winged
Cattle Grid is a type of obstacle used to prevent livestock, such as sheep,
cattle, pigs, horses, or mules from passing along a road or railway
which penetrates the fencing surrounding an enclosed piece of land
or border. Cattle Grids are used in a wide variety of locations. We
have units appropriate to every location whether Domestic, Highway,
Off Highway or Heavy Industrial.
Product
Our range of cattle grids are available in a range of sizes and capacities suitable for many
applications 10 Tonne, 20 Tonne, 30 Tonne and 40 Tonne.
1. 10 Tonne Capacity Dist. Wt - 3000mm (9'10") wide x 2600mm deep
2. 20 Tonne Capacity Dist. Wt - 3600mm (12' 1/8") wide x 2600mm deep
3. 30 Tonne Capacity Dist. Wt - 4050mm (13' 3 1/2") wide x 2600mm
deep
4. 40 Tonne Capacity Dist. Wt - 4500mm (14' 9 1/4") wide x 2600mm
deep
| Galvanized Cattle Grid |
| 1. Material | Galvanised RHS |
| 2. Size | 4.0m x 2.0m |
| 3. Finish | All welds are painted |
| Highway Cattle Grid |
| 1. Material | Painted Prime Stock |
| 2. Size | 4.0m x 2.0m/4.0m x 2.5m |
| 3. Finish | Painted |
| 4. Optional Finish | Hot Dip Galvanised |
| 5. Top Rails | 75mm x 75mm x 6mm |
| 6. Base Rails | 250mm x 150mm x 5mm |
Features
1. Concrete stock grid rated to MRDWA standards.
2. Quick and easy to install.
3. Fully engineered for 20T axle load rating.
4. Available in 900mm increments - can join to make any width.
5. Precast elements available for purchase by themselves.
6. Custom steel grid can be built to suit or we can supply.
7. Animal friendly.
Applications
Cattle grids are seen throughout the world and are quite common in places such
as Australia, the Scottish Highlands, or the National Parks of
England and Wales. They are also common throughout the Western
United States and Canada. In the United States, they are often used
on BLM and Forest Service land, but are also used on paved roads
and exit ramps of the Interstate Highway System in rural areas.
