Outdoor / Indoor Inside Movablep Portable Horse Stable For Sale
The United States Department of Interior National Park Service
(NPS) is undertaking the Marin Equestrian Stables Plan (Plan) to
guide the future use, management, and location of stables located
on lands within the Golden Gate National Recreation Area (GGNRA,
the Park) in southern Marin County, California. The Park currently
manages three existing horse stables under permit by individual
operators including Golden Gate Dairy, Tennessee Valley and Rodeo
Valley stables. A fourth stable, operated by NPS and known as Lower
Tennessee Valley stables, currently houses Park Horse Patrol
operations. The National Park Service has identified certain issues
associated with these stables, including site capacity, facility
improvements, management, public benefit, and the protection and
enhancement of important park resources, both cultural and natural.
The Plan has been proposed to address these issues to achieve and
maintain consistency with NPS management plans and policies. This
environmental assessment (EA) describes and analyzes four
alternatives for the improvement and expansion of the equestrian
stables.
To remove old bedding from the stall, you will need a four-pronged
fork or a shavings fork. To remove droppings and other debris, you
will need a shovel. You should also bring a muck sack or
wheelbarrow to remove waste from the barn. Finally, remember to
bring new bedding to put down in the stall when you are finished
cleaning.
For the safety of both you and the horse, the stall must be empty
when you clean it. If there is currently a horse in the stall you
plan to clean, you must take it out of the stall and secure it
before you begin the process. Secure your horse with a lead rope
and halter somewhere outside of the stable. You should also remove
any hay nets, water buckets, feed buckets or other items in the
stall that could become obstacles while you are cleaning.
After the horse is restrained, use a fork or shovel to remove old
bedding and manure. If you are wearing gloves, you can also use
your hands to remove debris. Place everything removed from the
stall in the wheelbarrow. Make sure all areas of the stall are
cleaned thoroughly, including the corners.
Next, use a broom or brush to sweep the floor. Allow the stable to
dry out for a couple of hours if possible, leaving any windows and
doors open to speed up the process. Dispose of the bedding in an
area far from the stables. If you have a muck heap, be sure to
carry all of the material removed from the stall to the top of the
heap, rather than just dumping it at the bottom.
The product details:
| Item | Heavy duty Galvanized Horse stall |
| Other key words | horse stable /horse house/horse feeding house/indoor safety horse
house |
| Each panel Size (w*h) | 4*2.2m,3.6m*2.2m,3m*2.2m ,other sizes on request
|
| Material | 40*40mm, or 50*50mm |
| Surface | Hot dipped galvanized |
| Advantage | Easy connection, NO need of support post |
| Horse safe, no sharp edges |
| Any other requirements, please feel free to contact us . |
