saling copper alloy rods cold rolling mill/copper rod and wire cold
rolling mill
I. major information
Mechanical design uses advanced crafts and high-quality materials,
such as roller; the appearance of the machine adopts German
design,which has higher work efficiency than other similar
products；
II. Advantage of 2 high cold rolling mill
Rollers of each rolling stand are driven by separate inverter
motor. When the shape of the pass and rotating speed of each pass
stand roller are changed at the same time, each stand can operate
asynchronously. Processing rollers can change the shape of the
pass, and the gear ratio of each stand roller can be set on the
touch screen. So on the premise of meeting the stand strength,
2-roller copper rod cold rolling mill can roll different dimensions
of copper rod and also roll other materials.
III.Main Data
No. Item Data
1 Model 20mm-8mm cold rolling mil for oxygen free copper rod
2 Inlet dia 20.0mm
3 Outlet dia 8.0mm
4 Outlet rod out of roundness No more than 0.2mm
6 Rolling pass 10
7 Rolling speed Max 1.6 M/S
8 Pass schedule ellipse-round hole type system
9 total extend compression ratio 6.25
10 each pass compression ratio 1.15-1.3
11 Total installing power 200kw
IV.Main component
1. Rolling mill base 2. 2-roller motive power frame(including
reducer, Inverter motor) 3. Pay-off frame 4. coiling take-up system
5. Lubrication system 6. Emulsion system 7. Electronic control
system 8.straightening device
V.Spare parts for 20mm-8mm forming units
| No. | Name |
| 1 | rollers |
| 2 | Roll shaft |
| 3 | guide |
| 4 | Expansion sleeve |
VI.Technical process
1.check the device
2.touch screen to enter into the normal working screen,
3.open the oil pump
4.open the emulsion pump
5.rolling copper rod
6.increase speed
55mm, 35mm, 25mm, 20mm, 17mm, 16mm, 14.4mm, 12.5mm, 8mm
20mm,18mm, 17mm, 8mm, 6mm, 5mm, 4mm, 3mm
Dear friends,
welcome to contact with us!
