10 Watt Power DC Gear Motor Long Lifespan For Automatic Doors
D6075PLG
D6075PLG: DC Gearmotors for Automatic Doors, Automobiles, Actuators
and Automated Devices
This product is a compact high efficient brushed DC motor, magnet
ingredient consist of NdFeB(Neodymium Ferrum Boron) which greatly
enhance the efficiency comparing to others available motors in the
market.
Typical Application:
Gearmotor, linear actuator,power tool,automated devices
Features:
Low Noise, Long lifespan, Cost less and Save more for your
benefits.
Motor Technical Data:
| TYPE | Rated
voltage
VDC | No-load
speed
r/min | No-load
current
A | Rated
speed
r/min | Rated
torque
m.Nm | Output
power
W | Rated
current
A | Stall
torque
m.Nm | Stall
current
A |
| D6075-2412 | 24 | 1200 | 0.16 | 890 | 40 | 3.7 | 0.43 | 0.15 | 1.1 |
| D6075-2420 | 24 | 2000 | 0.3 | 1500 | 35 | 5 | 0.8 | 0.19 | 2.4 |
| D6075-2430 | 24 | 3000 | 0.4 | 2500 | 40 | 10 | 1.1 | 0.26 | 5 |
Gear motor Technical Data:
| Reduction ratio | 3.6 | 4.25 | 13 | 15 | 18 | 47 | 55 | 65 | 76 | 168 | 198 | 234 | 276 | 326 |
| Number of gear trains | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 |
| (L) Length(mm) | 34.5 | 34.5 | 45.8 | 45.8 | 45.8 | 57.1 | 57.1 | 57.1 | 57.1 | 68.4 | 68.4 | 68.4 | 68.4 | 68.4 |
| No-load speed (r/min) | 333 | 282 | 92 | 80 | 67 | 25 | 22 | 18 | 16 | 7.1 | 6.1 | 5.1 | 4.3 | 3.7 |
| Rated speed (r/min) | 247 | 209 | 68 | 59 | 49 | 19 | 16 | 14 | 12 | 5.3 | 4.5 | 3.8 | 3.2 | 2.7 |
| Rated torque (mN.m) | 0.14 | 0.16 | 0.47 | 0.54 | 0.65 | 1.6 | 1.9 | 2.2 | 2.6 | 5.4 | 6.4 | 7.6 | 8.9 | 10.6 |
mN.m
Max. permissible load in a short time | 6 | 6 | 25 | 25 | 25 | 50 | 50 | 50 | 50 | 60 | 60 | 60 | 60 | 60 |
Drawing:
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and
technical requirements.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum
order quantity. Normally 1000PCS, however we also accept the custom made order with
smaller quantity with higher expense.
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of
Analysis / Conformance; Insurance; Origin, and other export
documents where required.
4.What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become
effective when (1) we have received your deposit, and (2) we have
your final approval for your products. If our lead times do not
work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs.
In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or
PayPal: 30% deposit in advance, 70% balance before shipment.
