Industrial HAST Accelerated Aging Chamber Multilayer Circuit Board PCT Chamber for LED diodes

ASLi Factory Industrial Programmable Rubber Accelerated Pressure Aging Test Chamber with Stainless Steel sus304

Application about weathering test chamber:

It is widely applied for the testing of sealing property for multilayer circuit board, IC sealing package, LCD screen, LED, semiconductor,

magnetic materials, NdFeB,

rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

Technical Parameters of aging testing chamber:

Model	PCT - 25	PCT - 35	PCT - 45	PCT - 55	PCT - 65
Internal Dimension Φ×D (mm)	300×250	350×450	450×550	550×650	650×750
External Dimension Φ×D (mm)	750×1200×800	800×1250×800	900×1380×900	1050×1550×1100	1200×1700×1250
Temperature Range of Saturated Steam (Operating temperature)	(Temperature Rangeof Saturated Steam:100℃~135℃) ,Temperature Range: 120℃,100Kpa/ 133℃ 200 Kpa;(143℃ is special order)
Relative Pressure/ Absolute Pressure	Relative pressure: display values indicated on the pressure gauge Absolute pressure: Value that add 100 Kpa based on display values indicated on the pressure gauge (The actual value in the inner box)
Comparison Table of Temperature, Humidity , Pressure of Saturated Steam
Humidity of Saturated Steam	100%RH saturation steam humidity
Steam Pressure(Absolute Pressure)	101.3Kpa +0.0Kg/cm2 ~ 2.0Kg/cm2 (3.0Kg/cm2 is special standard)
Recursive Device	Steam Natural convection circulation
Safety Protective Devise	Water short storage protect, over pressure protect. (have automatically/manual water replenishing, automatically discharge pressure function )
Accessories	Two layers stainless steel plate
Equipment Capacity(L)	17	43	87	155	250
Powder	AC 220V, 1∮ 3 Lines ,50/60HZ ;

Safety Device for stress test chamber:

1. Safety device for the pot: If the inner box is not closed , the machine can not start

2. Safety Valve: When the inner box’s pressure higher than the machine’s undertake value, it will self-relieve.

3. Double overheat protection device: When inner box’s temperature is too high, it will alarm, and Automatic cut off the heating power.

4. Cover protection: The inner box’s cover is made of aluminum alloy, can protect the worker from scald.

Features with accelerated reliability testing:

1. Automatic water supply.

2. Automatic operation to test process finished, easy to use.

3. LED digital temperature controller

4. LED digital timer, time signal terminal as standard function.

5. Easier Operation with Touch-Screen lnput

6. Accurate pressure: temperature chart always shows the inner box’s pressure and relative humidity.

7. Separate Steam Generator

8. Integrated silic gel door for long life using.

9.The inner box is mirror-polished , easy to clean

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.HAST Un-Saturated Steam Chamber is our star products, and we had obtained the CE certification for this machine.

FAQ

ASLi (China) Test Equipment Co., Ltd is authenticated by competent testing centers, including the National Measurement andTestingCenterand South China Center of Metrology. Famous for precision and reliability, these products have been extensively used within the industry, by research institutions, quality inspection agencies, and colleges and universities both at home and abroad, serving a worldwide customer base.

With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, ASLi (China) Test Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards, IE, ISO, ASMT, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA and CEN.