Shell Seal Climatic Dust Sand Proof Test Chamber Sealing Element
Testing
Use :
Shell Seal Climatic Dust Sand Proof Test Chamber Sealing Element
Testing is able to supply a complete range of solutions for
carrying out Dust Test Specifications.This dust test chamber
provides testing as per various IEC-60529standards. Combination of
various testing cycles are available in a completely mono block
construction.All settings can be done in an ergonomically designed
control panel with accurate and uniform dust agitation.
Detailed Specifications:
| Model No | PT-2055 |
| Machine Name | Shell Seal Climatic Dust Sand Proof Test Chamber Sealing Element
Testing |
| Test chamber dimension | PT-2055A :800*800*800mm PT-2055B: 800*1000*1000mm PT-2055C: 1000*1000*1000mm |
| Metal screen wire diameter | 50um |
| Screen line space | 75um |
| Environment temperature and humidity | 15~45°C, 45~75%RH |
| Dust(talcum powder) concentration | 2~4kg/m3 |
| Test time | Dust test time set freely, 0~999.9hr |
| Test dust | Dry talcum powder or portland cement |
| Test standards | GB4706,GB2423,GB7000.1,IEC60529 |
| Power | 3ψ 4W+G 380VAC 50HZ |
Structure Features:
1. Inner material: Stainless steel (SUS #304)
2. Outer material: Powder painting steel plate
3. Imported touch screen programmable controller, can control dust
blowing motor, dust vibration and test time
4. With sealing good chamber door, has lock device and glass
observation window.There is lamp and dust brush to ensure easy
observation of inner chamber.
5. With strong dust blowing device and vibrator to ensure informity
of each blowing.
6. Circulating air supplying device: Frequency converter and high
pressure motor to ensure the air volume more precision.
7. Large diameter strong stainless steel air hose, covered with
heating device, can heat and dry the test chamber dust.
8. Anti-explosion handle, easy operation, strurdy and durable.
9. Imported high-precision electronic temperature humidity sensor
and air speed sensor.
10. Test sample differential pressure test device, can set pumping
rate freely according to sample inquiry.
11. There is a ψ50mm test hole on the left chamber and equipped
with port lid and silica gel chock plug. Through this hole can
connect to outer test device.
12. There are casters with brake equipments and fixing foot pad to
make the machine easy operation and level adjustment.
13. With voltage current indicator, equipped with corresponding
sample DC12V power, DC24V / 20 a, interval, continuous
power supply adjustable. Dust concentration wind speed regulating
function. May control test total time, blow the dust of time
interval and blowing dust cycle and sample with the power source of
the intermittent time.
14. Vacuum system: Equipped with pressure meter, air filtration,
dust dehumidification system, regulating triple pieces,
connecting pipe (Vacuum pump should be prepare by customers)
