Type J Thermocouple RTD With 24GA Kapton Leads And Metal Transition
Product Description:
A thermocouple is a sensor for measuring temperature. It consists
of two dissimilar metals, joined together at one end, which produce
a small unique voltage at a given temperature. This voltage is
measured and interpreted by a thermocouple thermometer. The hot
runner thermocouples are custom-designed to suit all applications
where sheathed thermocouples are required. An extensive range of
elements, transition sleeves and process connections can be
individually selected for the appropriate application. With the
flexibility and small diameters in which they are available, hot
runner thermocouples can be used in locations that are not easily
accessible.
Thanks to their unique design, the hot runner thermocouples are
especially suited for applications where the metal sensor tip is
fitted directly into a drilled hole or press-fitted into a grooved
channel along the machined parts.
In the standard version the thermocouples are manufactured without
process connections. Fastening elements such as a union screw, a
compression fitting, or a spring-loaded or customer-specific hold
down device can be attached and are available as options.
Specification:
Probe Outside Diameter | 0.5mm, 1.0mm, 1.5mm |
Calibration | Standard limits of error (Type K,J,T,E,N) Special limits or error (Type K,J,T,E,N)
|
Sheath Material | 304 Stainless Steel 316 Stainless Steel Inconel 600
|
Junction | Ungrounded , Grounded
|
Cable Insulation Description | 24 Gage, Stranded , Kapton 24 Gage, Solid, Kapton 24 Gage, Stranded, 24 Gage,Solid, 24 Gage,Stranded, Fiberglass 24 Gage, Solid ,Fiberglass |
Termination type | 50mm split leads and 15mm Bare Ends. 50mm split leads and spade lugs. Standard Male Plug (425F) Standard Female Jack(425F) Mini Male Plug(425F) Mini Female Jack(425F) Hi Temp Male Plug(800F) Hi Temp Female Jack(800F) |
Feature:
1. Moulded transition eliminates all possibilities of potential
defects when inserted, formed and used in Hot Runner systems.
2. The sensor can be formed or mounted into the process, or with
the use of a swivel nut or a spring-loaded bushing.
3. Sensor diameter available from 0.5 to 1.5mm ;
4. Extension cable are available in a variety of insulation
materials. These include kapton, fibreglass, PTFE or PVC with or
without stainless steel overbraid.
5. The thermocouple sensors are available with a variety of sheath
materials including stainless steel, corrosion resistant and high
temperature oxidation resistant alloys.
Application:
Hot runner manifolds
Moulds used in injection moulding machines
For direct installation into the process
Plastics and rubber industry
Hot runner bushings, drops and nozzles
