Product Description
Basic information of roll forming machine door
roll forming machine door is made up of uncoiler , feeding part,
main roll forming system ,
cutting system and receive table.
The production of shutter door machine are widely used in the
production of various industrial plants, warehouses and
supermarkets, shopping malls shutter doors.
Kingter roll forming machine door features:
1. Take continuous production,there is no need to change the
rollers in rough-forming section.
2. Shutter door machine production of pressure plate,stately
elegance,beautiful novel,appearance smooth,
corrugated uniform, high utilization, high strength, high degree of
automation, low cost and durable.
Some profiles for the shutter door
Main specifications roll forming machine door, :
Take one type of machine for example:
| Processing material | colored steel plate, galvanized plate, or aluminium plate |
| Material thickness | 0.6---1.2 mm |
| Material hardness | 550 mpa---350 mpa |
| Material width | 1000mm |
| Formed width | 747mm |
| Forming speed | 12m/min |
Working Process of roll forming machine door, :
Decoiling--active feeding--roll forming--measuring
length--pressing--cutting to length--product to stand
Main elements:
Decoiler, main forming machine, hydraulic pressing, hydraulic
cutting, product stand, hydraulic system, electric system.
Basic parameters of roll forming machine door,
Decoiler | coil inner diameter | 450-550mm |
| max carrying capacity | 5000kg |
It is used to support the steel coil and uncoil it in a turnable
way. Passive uncoil pulled by roll forming system
|
Main machine | Shaft material & rollers material & shaft diameter | 45# steel adjustable treatment; 45# steel, polished, plate of chrome 0.05mm; 60mm |
| power | 5.5kw |
| Transport | chain drive |
| Forming speed | 8-12m/min(max 30m/min) |
| Voltage | 380V 3 phase 60Hz or buyer's requirement |
| Total weight (Kg) | About8000kg |
| Yield stress | 230~300Mpa |
| Tile Thickness | 0.6-1.2 mm |
| Tile Type | PPGI/GI /Aluminum coil |
| Controlling system | PLC |
| Hydraulic station motor power | 5.5kw |
| Operation | Touch screen and button |
| Material of blades | Cr12 quenched |
| Run out table | Customize according to customer need. |
1. One 20ft container for loading one set machine with manual
decoiler;
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam
film;
3. Spare parts and some small parts packed in plastic tooling box;
4. All Components Fixed by steel wire with Container.
Warranty
1). One year, and we will provide the technical support for the
whole life.
2).Training: the buyer should charge of visa, return ticket, food
and accommodation overseas and
USD50/person/day for salary.
3). Need one technicians
4).Training time: one week (contains the time of installation and
adjustment)
