Automatic Energy Drink Making Machine/ Carbonated Soft Drink
Filling Machine
Description
This DCGF serial machine special for carbonated beverage filling,
combined with rinsing,
filling and capping. It is innovated and designed in the
requirement of carbonated beverage
techniques, on the bases of introducing, digesting and absorbing
advanced technology
abroad. It is reasonable in structure, safe to operate and easy to
maintain, which is an ideal
choice for beverage producers.
technical parameter
| Model | DCGF16-12-6 | DCGF18-18-6 | DCGF24-24-8 | DCGF32-32-10 | DCGF40-40-12 | DCGF50-50-15 |
| Number of rising heads | 16 | 18 | 24 | 32 | 40 | 50 |
| Number of filling heads | 12 | 18 | 24 | 32 | 40 | 50 |
| Number of capping heads | 6 | 6 | 8 | 10 | 12 | 15 |
| Bottle standard(mm) | Diameter:Φ50-Φ108 Height:150-320 |
| Rated production capacity(500ml) | 2000BPH | 4000BPH | 7000BPH | 8000BPH | 10000BPH | 12000BPH |
| Installed capacity(KW) | 3.8 | 4.3 | 6.5 | 8.7 | 9.5 | 12
|
Feature
1). Compact structured, good-looking, and easy to operate and
highly automated.
2). Air conveyor is directly linked with feed-in starwheels, making
it easier to change bottles without screws
and conveyor chains.
3). Bottles are transferred in the manner of clamping neck. Bottles
can be changed through some replacement
of steel clamps, which instead of adjusting the height of machine.
4). Rinser-clamp which special design is strong and endurable, no
contact with bottle-mouth, to
prevent pollution.
5). Highly effective spraying nozzles equipped on the rinser-clamp
can rinse every side of inner bottle and save
water. Accessories which contact with material are all made of stainless
steel, no dead angles and easy to clean
up.
machine pictures
Washing system: the holder will catch the bottle and turn 180 degrees in order to
spray medium into
bottle to finish a flush program in order to ensure bottle clean.
Also in accordance with the requirements
of local users on the realization of disinfectant, the system will
flush the bottle secondly to improve the
product.
Filling system: the main components includes feeding tanks, piping, filling
valve, filling head,gear,motor
and control system.the control system is the main brain of the
machine,it controls filling,motor,conveyor
etc,the medium comes from tank goes to filling valves through
piping,filling head connect with bottle then
valve open,medium fills the bottle.
capping system:The capping system is controlled by PLC,when bottle in place it
cappings immediately.
we are professional in beverage filling machine, if you tell us
your
request, we will offer you the most commercial proposal... ...
