ADAS Headway Monitoring and Warning Recognition Camera Lane
Departure Warning
Installation
When DB-A502 is installed, the camera should be fixed onto the
central location of the front windscreen, that is, a left or right
position within a range of 10 cm from the central axis of the
vehicle will be allowed and a position closer to the center will be
more desired.
Note: the camera cannot be blocked by windscreen wipers; for a
vehicle with its engine projecting from the front windscreen, the
installation location should be appropriately raised in order to
ensure that the camera is not blocked by the front projection.
The power line, ACC signal line, turning signal line, and brake
signal line are well connected. (There is no need to connect the
signal line when a variety of signal lines are acquired through
communications with other devices.)
Product Introduction
| Electrical Properties | |
Operating voltage | +9V ~ +36V |
Rated power | 3W |
Alarm Instantaneous Power | 4W |
Operating Temperature Range | -20℃ ~ 75℃ |
Storage Temperature Range | -30℃ ~ 85℃ |
Operating Humidity | 0 ~ 90 RH%±5% |
Function Description
1. Driving Video Recording
DB-A502 can record 1080P HD videos and perform automatic cyclic recording
every 3 minutes and store data into the high-speed class 10 SD
card.
2. Emergency Lockout
When the vehicle encounters severe turbulence or collision during
traveling,DB-A502 can immediately lock the current video and will
not delete it from cyclic recording.
3. Driving Behavior Detection
The DB-A502 can detect the Rapidly Speeding-up, Hard Braking, and
High-speed Turning of the vehicle through built-in sensors.
4. Video Output
DB-A502 supports video output in CVBS format, or support the PAL
(default) or NTSC system for video recording by DVR.
5. Volume Adjustment
The volume can be lowered or increased by repeatedly pressing the
button (-) or (+) on the side of the product, respectively; and the
volume is at five levels of from 1 to 5.
6. Serial Port Communications
DB-A502 can support RS232 and can communicate with other devices to
transmit vehicle information and various alarm information.
7. Signal Input and Output
DB-A502 has 3-way signal inputs which can be connected to the turn
signal and brake signal.
8. Mobile APP Linkage
An Android Phone may install ROADRAGON APP in “Road-Defend” and may be connected to
the WiFi hotspot of the device, and the
