Intelligent 0.6S High Speed Boom Barrier Gate No Noise 24V DC Servo
Motor
Servo motor advanced features:
| 1)More than 60,000 operation times per day |
| 2)Speed adjustable from 0.6s to 4s. |
| 3)When power off, barrier gate will open automatically,no need manual release,Self-detect and work automatically when power on. |
| 4)Motor will NOT getting hot after continuous long run.NO noise when operating |
| 5)Strength can be adjustable for auto reverse to make sure cause less damges on the vehicle. |
| 6)Internal RS 485work with software to connect your computer. |
| 7)Power supply can connect with backup battery or solar power. |
| 8)0.9s can work with 3m straight arm or 3m 90 degree folding arm. |
| 9)Free debugging,maintenance-free. |
| 10)Can be install at both sides,LEFT Or RIGHT. |
| 11)Lifetime warranty for motor, 2 years warranty for rest parts. |
Technical data:
| arm length: | 2000mm-6000mm |
| opening and closing time: | ≤ 0.6s, 0.9s, 2s, 4s |
| Rated voltage: | AC100V ~ AC264V, DC24V |
| Frequency: | 50Hz ~ 60Hz |
| Motor rated power: | 50W, the maximum power of 100W |
| Working environment temperature: | -40 ℃ ~ 75 ℃ |
| Power: | standby ≤ 8W, run ≤ 100W |
| Dimensions (W * D * H): | 342 * 312 * 959mm |
| Lifetime: | more than 10 million or 10 years |
| MTTR: | <0.5 hours |
| MTBF: | > 5 million times |
| Protection degree: | IP65 |
| Relative humidity: | ≤ 90% |
| Motor no-load speed: | 3000 r / min |
| Remote control distance: | ≤ 100 meters |
| Longest ARM length: | 6 meters |
| Output torque: | 0.86N.M * 140 = 120N.M. |
| running noise: | < 50dB |
| Barrier N.W | 42.6kg |
| Machine core N.W | 22.1kg |
| Surface treatment | Outdoor metal powder, electrostatic spraying |
Function Description:
1.When Power off, gate automatically open, no clutch design, no
need human intervention. When power
on, gate automatically reset,
restore to the gate closing state, truly unattended, fire safety
standards. If special requirement, manual
operation is required when
power off . Operating arm open and close by hand also can be
realized by setting up control board DIP
switch, which ensure that the system can be used at any time.
2. The use of Single Balance Spring device, good regulation, no
noise, indefatigable, not easy to break,
safe and reliable.
3. A variety of input and output modes can be selected, normally
open normally closed optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10
degrees resolution, suitable for eaves
prominent place to install.
5. Closing speed can be adjusted, 0.9S, 1.3S.
6. Barrier gate up&down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the
gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared
sensor signals anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function, regardless of the
current gate in what state, the operator
through the triple push button,
software or remote control to issue a gate arm up, the gate will
give priority to the implementation of the
opening action.
13. Barrier with anti-collision protection function, when the
vehicle hits the gate arm, arm can be swing
out to avoid damage to the vehicle
and barrier gate machine.
14. Delay down selection function.
15. high sensitivity arm auto reverse function (intensity can be
adjusted)
16. Parking system interface
17.RS485 or RS232 network communication control up&down
interface (no need to install communication
module)
18. Anti-collision alarm signal interface.
19. Arm direction can be changed easily
20. Adjustable speed port (S curve adjustment)
21. High-strength precision cast steel, industry moving parts
beyond the industry quality
RFQ:
Q: What's the order process?
A: Follow the steps on below to complete your order.
- 1. Inquiry
Provide us detailed information about your requirement, and we'll
recommend the suitable products according to your request
-2. Quotation
Official quotation form with all clear specifications according to
the order
-3. Invoice
Invoice will be issued once the quotation is confirmed.
-4. Payment
Payment shall be issued once the invoice issued. Full payment is
acquired.
-5. Production
Bulk production shall be taking 15-25 working days.
-6. Delivery
by sea, air or courier. Detailed picture of package will be
provided upon the service you've chosen. Packaging info will be
sent upon confirmation.
Contact Us For Catalogue And Pricilist:
Sales representatives: Keira
Whatsapp: +86 18507481610
Skype: zimin1314
Email: keira@wonsunbarrier.com
