AAAC-All Aluminum Alloy Conductor
The light weight all aluminium alloy conductor has such advantages
as high strength, nonexistance of electrochemical corrosion, long
service life, sound electricity conductivity, etc.
It is used to transmit current and is made through stranding
aluminium alloy wires instead of aluminium wires in a spiral manner
and according to a certain rule. It's tensile strength is 1.7-1.8
times of that of an ordinary conductor.
The rigidity of our AAAC is very high so the surface scratch when
putting up transmission lines can be minimized and the construction
quality can be greatly improved.
Standard
Our AAAC conductor meets the standards of ASTM B399, BS EN50183, BS
3242,DIN48201,IEC 61089
Application
The AAAC is used for overhead power transmission lines , especially
the electric power augmentation of old transmission lines.
When replacing the aluminium conductor steel reinforced , the AAAC
can save 5-8% of the construction cost. This AAAC covers aluminium
alloy (hard solution, heat-treated, cold worked, and artifically
aged) round wires for electrical purposes to be used as component
wires of aluminium alloy conductor and aluminium alloy conductor
steel reinforced.
Construction
Standard 6201, 6101 aluminum alloy conductors, are concentric-lay-
stranded, similar in construction and appearance to 1350 grade
aluminum conductors. They were developed to fill the need for an
economical conductor for overhead applications requiring higher
strength than that obtainable with 1350 grade aluminum conductors,
but without a steel core. The DC resistance at 20°C of the
6201,6101 conductors and of the standard ACSR of the same diameter
are approximately the same. Conductors of the 6201,6101 alloys are
harder and, therefore, have a greater resistance to abrasion than
conductors of 1350-H19 grade aluminum.
Properties
1. high strength
2. nonexistance of electrochemical corrosion
3. long service life
4. sound electricity conductivity
5. long distance power transmission
| Code Name | Stranding&wire diameter | Approx Overall diameter | Total area | Weight | Breaking Load | DC Resistance at 20 °c | Current Rating |
| — | mm | mm | mm 2 | Kg/km | KN | Ohm/km | A |
| Box | 7/1.85 | 5.55 | 18.8 | 51.4 | 5.55 | 1.748 | 93 |
| Acacia | 7/2.08 | 6.24 | 23.9 | 64.9 | 7.02 | 1.3828 | 110 |
| Almond | 7/2.34 | 7.02 | 30.1 | 82.2 | 8.88 | 1.0926 | 128 |
| Cedar | 7/2.54 | 7.62 | 35.5 | 96.8 | 10.46 | 0.9273 | 132 |
| Deodar | 7/2.77 | 8.31 | 42.2 | 115.2 | 12.44 | 0.7797 | 148 |
| Fir | 7/2.95 | 8.85 | 47.8 | 130.6 | 14.11 | 0.6875 | 161 |
| Hazel | 7/3.30 | 9.9 | 59.9 | 163.4 | 17.66 | 0.5494 | 184 |
| Pine | 7/3.61 | 10.8 | 71.6 | 195.6 | 21.14 | 0.4591 | 204 |
| Holly | 7/3.91 | 11.7 | 84.1 | 229.5 | 24.79 | 0.3913 | 222 |
| Willow | 7/4.04 | 12.1 | 89.7 | 245 | 26.47 | 0.3665 | 233 |
| Oak | 7/4.65 | 13.95 | 118.9 | 324.5 | 35.07 | 0.2767 | 272 |
| Mulbery | 19/3.18 | 15.9 | 150.9 | 414.3 | 44.52 | 0.2192 | 319 |
| Ash | 19/3.48 | 17.4 | 180.7 | 496.1 | 53.31 | 0.183 | 354 |
| Elm | 19/3.76 | 18.8 | 211 | 579.2 | 62.24 | 0.1568 | 385 |
| Poplar | 37/2.87 | 20.1 | 239.4 | 659.4 | 70.61 | 0.1387 | 414 |
| Sycamore | 37/3.23 | 22.6 | 303.2 | 835.2 | 89.4 | 0.1095 | 487 |
| Upas | 37/3.53 | 24.7 | 362.1 | 997.5 | 106.82 | 0.0917 | 527 |
| Yew | 37/4.06 | 28.4 | 479 | 1319.6 | 141.31 | 0.0693 | 629 |
| Totara | 37/4.14 | 29.42 | 498.1 | 1372.1 | 146.93 | 0.0666 | 640 |
| Rubus | 61/3.50 | 31.5 | 586.9 | 1622 | 173.13 | 0.0567 | 716 |
| Sorbus | 61/3.71 | 33.4 | 659.4 | 1822.5 | 194.53 | 0.0505 | 760 |
| Araucaria | 61/4.14 | 37.3 | 821.1 | 2269.5 | 242.24 | 0.0406 | 842 |
| Redwood | 61/4.56 | 41 | 996.2 | 2753.2 | 293.88 | 0.0334 | 920 |
PACKING AND SHIPPING
Packing: steel wooden drum, other as required ; standard delivery
length is 300 m
| Packaging details : | Delivery : |
 |  |  |
| Steel Wooden Drums | Cable Drum In container | shipped in 15 days after payment |
Cable Drum Data
| CABLE DRUMS | D1=Flange Diameter(mm) | W=Useful Width (mm) | D2=Barrel Diameter(mm) |
 | 1000 | 700 | 500 |
| 1100 | 700 | 550 |
| 1200 | 700 | 600 |
| 1400 | 750 | 710 |
| 1600 | 900 | 900 |
| 1800 | 1120 | 1000 |
| 2400 | 1150 | 1300 |
Delivery Port:
 |  |  |
| Port of Shenzhen | Port of Hongkong | Port of Guangzhou |
 |
| CUSTOMER SERVICES: |  |
We manufactures a comprehensive array of wires and cables to meet
diverse market needs.
If this all seems a litle too technical for you, then why not get
in touch with us.
We look forward to assisting you in identifying the best products
for your specific application and to answer any questions you might
have.
Tel:+86 755 6114 5028 Fax:+86 755 61137976 E-mail : cttcable@hotmail.com | Shenzhen chengtiantai cable operates certified management systems
compliant with: ISO 9001:2008 / ISO 14001:200]4 / OHSAS 18001:2007
● Cable production started 1983
● 35 years of cable manufacturing experience ● Sales in 2016 about 500 million USD ● 100,000 m2 Production area
● 350 Will-trained employees ● 8 workshop
● 1 R&D Center
Head office: chengtiantai Industrial Park, Lisonglang community,
Gongming office, Guangming district, Shenzhen P.R. China 518106 |
Because we continuously improve our products, CTT Cable reserves
the right to change specifications and availability without prior
notice.
