Galvanized Steel Insulation anchor Pins For Mineral Wool Wall
Inaulation Board
Description of galvanized steel insulation anchor pins
Galvanized Steel Insulation anchor Pins, also named metal expanded
plug, rock wool insulation pins , inculation support and wall anchor plug. it is made of galvanized steel tube with
round washer base. the product techincal is stamped by CNC machine with mould, then Iron pipe and base riveted together.
insulation anchor pins is for fastening rigid insulation to
masonry. It is as simple as drilling straight through the insulation into the masonry and hammer the insulation
fixing the mineralwool for external walls.
Detail data of the Galvanized Steel Insulation anchor Pins
Material:Galvanized steel or stainless steel or to be your order
Size (mm) :common type see the following data sheet, specification
size, need customer supply drawing with details.
Surface treatment: galvanized, copper plated, polish
Data of Galvanized Steel Insulation anchor Pins
| Pin Size | Plug Diameter | Pin Length | Round base washer Size | Pin Weight |
| M8x50 | 8mm | 50mm | 30mm / 35mm | 10.2g |
| M8x60 | 8mm | 60mm | 30mm / 35mm | 11.2g |
| M8x90 | 8mm | 90mm | 30mm / 35mm | 14.8g |
| M8x110 | 8mm | 110mm | 30mm / 35mm | 17.3g |
| M8x140 | 8mm | 140mm | 30mm / 35mm | 20.8g |
| M8x170 | 8mm | 170mm | 30mm / 35mm | 24.4g |
| M8x230 | 8mm | 230mm | 30mm / 35mm | 34.4g |
Application of the Galvanized Steel Insulation anchor Pins
Galvanized Steel Insulation anchor Pins Widely used in the construction and decoration, the anchoring
aspect of the wall insulation house. It consists of galvanized screws, nylon risers
and fixed discs. According to the thickness of the insulation layer, it is divided into various specifications.
According to JG149-2003 external wall insulation standards
Single insulation nail load capacity >0.8KN
Thermal conductivity >0.004
they are suit for concrete, natural stone with dense structure,
solid brick, solid sand-lime brick, solid block made from light weight concrete, aerated concrete, vertically perforated brick,
perforated sand-lime brick etc.
project installation sample:
The number of anchors installed on the outer wall insulation system
of the extruded board; the average of 1-10 layers is 6 per square meter, and the average of 11-20 layers is 7 per square
meter, 21-26, 9 per square meter. Any single block with an area greater than 0.1 square meter must be anchored, depending on the
shape and site conditions; the density of the anchor should be increased around the angle of the sun, under the mouth, and
around the edge of the hole. The distance is not more than 300mm, from the edge of the base. Not less than 60mm
Approval and Testing Report
images of galvanized steel insulation anchor pins
Packaging of the Galvanized Steel Insulation anchor Pins
__________________________________________________________________________
250pcs per carton, and then put the cartons on pallets; and also
could be packed as request.
