20-3000 Micron Johnson V Wire Type Tube, SS304 Wedge Wire Screen
Pipe Filter
Johnson V Wire Type Tube Details
___________________________________________________________________________________
Johnson V Wire Type Tube Stainless Steel Wedge Wire Screen Pipe
Filter, also called round slot tube. It is made of stainless
steel wire, which is the most popular type because of outstanding
chemical stability and corrosion resistance. The 304 316 wedge
vee wire screen strainer pipe is composed of working profile and support profile. It is produced
on an automotive machine. The
support profiles is placed on the suit position of the machine,
during the surface profiles are spirally wounding, the support
profiles
are welded onto the surface profiles.
To mechanically separate liquids and solid particles, rotary wedge
wire drum screens are used. Their construction is based on wire
tubes with supporting and reinforcing structure. The rotary sieves
have been prepared to work uninterruptedly, maintaining high
efficiency and at the same time low consumption of energy. The drum
screen is also self-cleaning.
specification of Johnson V Wire Type Tube
___________________________________________________________________________________
Material | SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc |
OD Range | 19mm-2000mm |
ID Range | 13mm-1981mm |
Length Range | Up to 6000 mm |
Slot Range | 20 micron to 3000 micron (Tolerance:+-5 micron) |
Wedge Wire | 0.5x1.5 | 0.75x1.5 | 1x2 | 1.5*2 | 2x3 | 2*4 | 3*5 |
Support Rod | 1.5x2.5 2x3 | 1.5x2.5 2x3 | 1.5x2.5 2x3 | 1.8*2.5 2x3 | 2x3 2x4 3x5 3x6 3x10 4x7 | 2x4 3x5 3x6 3x10 4x7 5x6 | 3x5 3x6 3x10 4x7 5x6 5x8 |
End Finishing | Thread fitting, Flange, Closed Plated, Resistance welded closed
plate, Metal Ring, etc |
Note | Customized According To Requirement |
images of Johnson V Wire Type Tube
___________________________________________________________________________________
Reversed profile | Finished | Variable slot opening |
Normal construction of slot tubes allows for flow out to in
filtration. However, flow-in -to-out constructions are also
possible.
This construction can also be used when the slot tube is used as
support tube for another filter medium, so that only the wedge is
in contact with the medium to increase the open area. | Standard finish
grinding of end surfaces
removal of loose profile ends
degreasing and pickling
Optional finish
fastening of loose profile ends
removal of burs of profile ends
post machining for tighter tolerances | For special purposes variable slot openings are possible for all
diameters.
Continuous cylinders
By using a lot of support profiles, an axial slot can be obtained.
These filter elements are called continuous cylinders. |
