Vacuum pump is used for the production and storage of negative
pressure for the vacuum plastic forming. Single pump or double pump
is depend on you. Double pump can ensure the safety and stability
of the system, and guarantee the air consumption while molding
large products.
Technical parameters:
A. Water-cooled sliding-vane rotary vacuum pump is used, with
pressure of over 0.9bar;
B. Control method: Automatic & manual;
C. Vacuum pressure tank: 3m3(single pump), 6m3(double pump);
D. Power for vacuum pump: 3-phase-4-wire 380V, 3KW/pump;
E. Power for cooling pump: 3-phase-4-wire 380V, 0.5KW
We are both the vacuum forming machines and acrylic/ABS bathtubs
and shower trays manufacturer
The bathtub making line need the devices as follows,
1. Acrylic bathtub vacuum forming machine
2. Air and vacuum system:
Vacuum pump(making vacuum), vacuum tank(to storage the vacuum), air
compressor(to make the high pressure air), air tank(to storage the
air pressure)
3. Edge trimming machine(to cutting the bathtub and shower tray
edges)
4. Resin and stone powder mixer
5. Fiber glass and resin spray gun(also can be done manually)
6. Bathtub designs and bathtub moulds
We are also the acrylic/ABS bathtubs and shower trays manufacturer,
if you buy the bathtub making line from us, we will help you to set
up the whole bathtub making line in your factory, or you can send
your technicians to our bathtub making factory to learn all the
bathtub making skills.
Please contact us:
Leo Wang (Export manager)
Mob/WeChat/WhatsApp/Viber: 0086-13867488227
Address: Yipeng Industrial Zone, Hangzhou City, Zhejiang Province,
China
Email: leo@yeedshower.com / yeedshower@qq.com
