Carbonated beverage rising filling capping 3 in 1 machine
1.Capacity: :0.5-2L 2000-24000bph
2. Bottle Diameter:50-110mm
3. Bottle Heigh:150-340mm
The carbonated filling machine is mainly used in the beverage filling operations. The three
functions of bottle wash, fill and seal are composed in one body of
the machine. The whole process is
automatic. The machine is used in filling juices, mineral water and
purified water in bottles made of polyester and plastics. The
machine can also be used in hot filling if being installed with
temperature
controlling device. The handle of the machine can be freely and
conveniently turned to adjust the machine to fill various types of
bottles. The filling operation is faster and more stable because
the micro
pressure filling operation of the new type is adopted. There the
output and benefit of the machine is higher than the machinery of
the same specifications. The advanced OMRON programmed controller
(PLC) is adopted to control the machine to run automatically while
a transducer is used in the bottle -entering chains to adjust
speeds and coordinated with the transducer of the main machine to
make the
operations of moving bottle forward steadily and reliably.
Technical parameter
| odel | DCGF 16-12-6 | DCGF 18-18-6 | DCGF 24-24-8 | DCGF 32-32-10 | DCGF 40-40-12 | DCGF 50-50-15 |
| Washing No | 16 | 18 | 24 | 32 | 40 | 50 |
| Filling No | 12 | 18 | 24 | 32 | 40 | 50 |
| Capping No | 6 | 6 | 8 | 10 | 12 | 15 |
| Production Capacity(500ml) | 3000BPH | 5000BPH | 8000BPH | 12000 BPH | 15000 BPH | 18000 BPH |
| Install Capacity(KW) | 3.5 | 4 | 4.8 | 7.6 | 8.3 | 9.6 |
| Overall size | 2450×1800×2400 | 2650×1900×2400 | 2900×2100×2400 | 4100×2400×2400 | 4550×2650×2400 | 5450×3210×2400 |
Machine pictures
inner look
washing
filling
capping
electrical system
3. The working process
The bottle enters into the rinsing part of three-in-one machine
through air conveyor. The gripper installed on the rotary disk
catches bottle and turns it over 180 degrees and makes the
bottleneck face ground. In the special rinsing area, the nozzle on
the gripper sprays juice to rinse bottle inwall. After rinsing and
draining, the bottle turns over 180 degrees along the guide rail
and make the bottleneck faces sky. Then rinsed bottle is
transferred to the filling part through poking bottle starwheel.
The bottle that enters into the filler is hold by neck holding
plate. The filling valve acted by the cam can realize up and down.
It adopts equal pressure filling way. The filling valve opens and
begins filling when it moves down and touches thebottleneck, the
filling valve move up and leave the bottleneck when it finishes
filling, the full bottle is transferred to the capping part through
hold neck transition poking wheel. The stop screwing knife holds
the bottleneck, keeps bottle upright not rotating. The screw
capping head keeps in revolution and autorotation. It can finish a
whole capping course including catching, pressing, screwing,
discharging through the action of the cam. The full bottle is
transferred to bottle outlet conveyor to the next process through
starwheel. The whole machine is enclosed with windows, the height
of enclosed window is higher than the peak of the 3 in 1 machine,
in the bottom of the enclosed window has return air outlet.
about our company
our main production lines:
1. bottling minereal/pure water production line;
2. barrel mineral/ pure water production line
3. bottling carbonated beverage production line (like coca cola);
4. bottling juice production line;
5. canning beverage production line;
6. glass bottle beer production line;
7. milk/tea filling&package line;
8. oil filling&package line;
our two workshops
certificate
