Alloy 3003 / 3102 Automobile Flat Aluminium Condenser Tube
Extrusion
Product Introduction:
Micro-multiport extrusion aluminum tube (MPE tube) is mainly used
for the production of heat exchangers. Due to its high
corrosion-resistance & good heat conductivity, MPE tube is
particularly well suited for the use in evaporators & condensers.
MPE tube is required increased burst strength and better heat
conductivity for an optimized product size. To meet the market
requirement, we developed zinc-coated & flux coated MPE tubes, it
can be supplied in the form of coils, or fixed length by
non-cutting separation method.
The Micro-multiport extrusion aluminum tube (MPE tube) is unique
tubes developed with the highest manufacturing quality,we are
trying our best ability to create the low weight design to help our
customers to decrease the tube weight and also decrease the
production cost,in the meantime,to make sure that the tube thermal and electricity conductivity is keeping on good,and the
tube we are supplying is having very good forming and bending
capability,and also good corrosion and pressure resistance which
could make our customers' products keep a long life and good
working performance.Besides,aluminum is a very eco-friendly
material which is having very good recycling value.For the tube size,we are having very strict mould
which could control the tolerance within a very narrow range.For
the tube inside and outside,it can be supplied clean,no block,and
no impurity.
Detailed Product Description:
| Alloy: | 3003,3102,1100,1050 | Temper: | O,F,H111,H112 |
|---|
| Shape: | Flat Oval | Applications: | Radiators,Condensers,Evaporators |
|---|
| Surface: | Zinc-spraying / Without Zinc-spraying |
|---|
Commonly used material chemical composition:
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 2 | 1100 | ≤0.95(Si+Fe) | 0.05-0.20 | ≤0.05 | --- | --- | ≤0.10 | --- | --- |
| 3 | 3102 | ≤0.40 | ≤0.70 | ≤0.10 | 0.05-0.40 | --- | --- | ≤0.30 | --- | ≤0.10 |
| 4 | 3003 | ≤0.15 | ≤0.15 | ≤0.01 | 0.90-1.10 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.05 | ≤0.05 |
Supply state and mechanical properties:
| Alloy | Temper | Tensile Strength | Yield Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥20MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
Normal tolerance range:
| Range | 0~3 | 3~6 | 6~30 | 30-120 | 120-315 | 315-1000 |
| Tolerance | 0.05 | 0.1 | 0.15 | 0.2 | 0.3 | 0.4 |
Applications:
Our aluminium tubes are widely used for automobile condensers and
evaporators for air conditioning systems as well as liquid lines
for air conditioning, heater cores and radiators for engine cooling
systems, charge air coolers and other cooling systems.
Our Extrusion equipment review:
1)Surface stains and foreign body removal
2)Oxide aluminum rod surface removal
3)Eddy current inspection: It uses the equipment of Germany DB
company,which can detect,identify and sort the defects of flat pipe
holes and broken ribs.
4)Zinc spraying system: It uses the thermal spraying equipment of
Japanese kucan company,which has a system of automatic adjustment
based on speed.The surface is uniform and delicate,to make the
demands of 6+/-2g,8+/-2g come true.
Package: In coil or Straight with fixed length.Packed in plywood
box specialized for export.
Surface Treatment : With Zinc spraying or without Zinc spraying.
