1300mm width EPS sandwich panel production line , 380V sandwich
panle forming machine
I Equipment Feature
| EPS Sandwich Panel Feature |
| Panel thickness | Mini thickness |
50mm (wall panel) |
| Max. thickness | 200mm(exclude corrugated sandwich panel) |
| Steel Sheet Feature |
| Thickness | 0.4-0.7mm color steel sheet |
| Width | 1250mm (we can design according to buyer’s requirement) |
| Max. coil weight | 5 tons |
| Inner Dia. of coil | 508mm |
| Whole Line Feature |
| Whole line dimension | about 35000mm × 2500mm × 3000mm |
| Total weight | About 18t |
| Working speed | About 5-7m/min (adjustable) |
| The output | 1500m2-2000m2/8hour |
| Control mode | PLC and converter |
| Total power | About 28Kw (as per final designing) |
| Power required | 380V/3phase/50Hz or as per customer's requirement. |
| Air pressure | 0.7Mpa (for buyer to prepare) |
| Suitable working temperature | About 25 degree |
II Project Feature
1. The source of the production raw materials is widely with no
regional restriction. The product is made of sawdust, straw (rice
hulls), many kinds of crop straw and inorganic material (such as
talcum powder, infusorial earth and powder coal ash) after special
technology. So this project have low production cost, small
investment and fast effectiveness.
2. The equipment has high automatic degree, simple production
technology, low labor intensity and production line, and there is
no noise and three-wastes (waste water, waste gas and waste
residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the requirements about production
technology without high temperature and high pressure.
Product Feature and Performance
| automtaic | full automatic |
| capacity | 2000SQM |
1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
| 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
| 3 | Anti-breaking load | ≥1400N | 5640N |
| 4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
| 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
| 6 | Thermal bridges area ratio | ≤8% | 2.22% |
| 7 | Sound reduction Index | | 36dB |
| 8 | Radioactivity | | None |
II.Application of the Sandwich Panels:
The sandwich panels produced by the equipment can be used for
ceiling, wall skirting, decorating of indoor wall and lining board
for furniture.
And our board can replace three-ply board, five-ply board,
flakeboard, MDF (Medium Density Fiberboard ) and Gypsum Board.
