Furnace Use Silicon Carbide Kiln Shelves High Strength Wear Resisting 500 * 370 * 15mm

Furnace use High strength refractory Sic kiln shelf 500*370*15mm

1. Introduction
Silicon Carbide Kiln Shelves are thin, lightweight made from an advanced Nitride-bonded Silicon Carbide composition, stronger and weigh half or less compared with a conventional 1” thick Cordierite kiln shelves. They do not sag or warp after many firings under heavy loads and suitable for temperatures up to 2600°F and a great choice for Gas, Soda and firing kilns. They are about twice the cost of Cordierite or High Alumina kiln shelves cost.

Kiln shelves should be stored standing up on their edges. Storing them flat makes it more possible for them to break or cracks. Keep shelve dry. If they do get wet (e.g., after applying kiln wash), heat them slowly and soak for a few hours at 300° F.
Kiln wash is a layer of material between your pots and kiln shelves protecting your kiln shelves during glaze firing preventing glazes from sticking to your shelves. Unglazed pots can stick to the kiln shelf if the clay body vitrifies. Kiln wash is made of silica sand, alumina hydrate and kaolin. You can mix your own kiln wash or purchase.

Glaze comes in contact with the kiln shelf when something unexpected occurred (e.g., running glaze, tipped over pot) during the glaze firing even if you wiped glaze off the bottom or used stilts. If kiln wash was not used in the above possible scenarios, your pot will stick to the shelf and break trying to remove it . You will have to grind the glaze off the shelf’s surface, remaining glaze soaked into the shelves will continue to erode the kiln shelf.

We also recommend applying kiln wash to the brick on the bottom of the kiln to prevent from glaze drip damaging the soft brick.

Warning: Stay away from electric kiln elements – kiln wash will corrode and reduce the elements life expectancy.

2. Specification

Yixing City Kam Tai Refractories Co.,ltd is located in Yixing, the Pottery capital of China. Our company is founded in 2006, it is a professional refractory and ceramic company which cover research, production, sales and after-sales service. Since establishment, we adhere to principle of “Technological Innovation, Never Stop”, continuously improve R&D and production process and equipment. Moreover, we cooperate with famous university such like Liaoning University of Science and Technology, Beijing University of Science and Technology.
Main Products
We mainly manufacture industry furnace refractory material such as Sic PLATE,Setter plate, Push plate, Pillar,Sagger, Technical Ceramic, Furnace material and so on. Our product is widely used to sinter Magnetic Material, Electronic Ceramic, Daily Ceramic, Powder Metallurgy, Rare Earth Battery Material and so on. Our sandwich setter plate, electronic ceramic used sagger, Lithium battery cathode material sintering sagger are very good , and they have been leader products in our field .
Company Vision

Since our establishment, we insist on “No best , Just Better” , aimed to be the top Supplier of Refractory material and Technical Ceramic in the world.