Environmental Testing Equipment , Temperature Humidity Test Chamber / Incubator

Capacity

80L

100L

150L

225L

408L

800L

1000L

Interior Dimension (W×D×H)MM

400*400*
500

500*400*
500

500*500*
600

600*500*
750

800*600*
850

1000*800*
1000

1000*1000*
1000

Exterior Dimension (W×D×H)MM

1000*870*
1700

1050*870*
1750

1050*970*
1750

1150*970*
1900

1350*1150*
1950

1450*1300*
2100

1470*1400*
2100

Temperature Range

0℃~150℃; -20℃~150℃; -40℃~150℃; -60℃~150℃;

Humidity Range

20％~98％RH

Temperature Volatility

± 0.5 ℃

Temperature Uniformity

±1.5℃

Humidity Volatility

±1.0％RH

Humidity Uniformity

± 2.0% RH

Humidity Area

Notes: Environment temperature:+25℃; R.H.≤85%
This two values measured under the condition of no test sample in the chamber

Heating/Cooling
rate

3℃/min (Room temperature to high temperature 150℃); 1℃/min (room temperature to minimum temperature).

Control Mode

Balanced temperature & humidity control mode, PID programmable adjustable.

Communication port

RS232 print interface.

Refrigeration system

Fully enclosed Tecumseh compressor France original, environmentally friendly refrigerant gas R404A.

Programmable Mode

Has adopted Korean TEMI850 controller English display, 120 program x 100 step and 100hours/step setting capacity (each step means specific temperature, humidity and test time), 999 cycles circulation setting, and enclose multiple sets of PID control function.

Controller Resolution

0.01℃, 0.01RH

Exterior Material

SUS#304 stainless steel material

Interior Material

1.2mm thickness SUS#304 stainless steel, rigid polyurethane foam+efficient ultra-fine glass cotton insulation materials.

Related Standard

1. IEC6008-2-1-2007 Electronic Electrician Product Environmental Test Part 2: test methods --Test Method A: low temperature.
2. IEC68-2-3 Ca test: constant humidity and heat test method.
3. IEC6008-2-30:2005 Db test: humid heat alternation method.

Air Circulation System

Inner air circulation fan, wind channel and stainless steel cycle fan, through the top window and air diffuser, the wind will out uniformly from the top, which could reach the purpose of control temperature uniformly.

Heating System

Adopt heating pipe P.I.D. control the heating so keep temperature balance.

Humidification&
Dehumidification System

Adopt outside water circulation humidification, and compressor is used for dehumidification, P.I.D. control the volume of humidification.

Safety Devices

Water level protection, water shutdown protection, over-temperature protection, high-pressure compressor protection, compressor thermal protection, compressor overload protection, fast fuse, buzzer alarm, overload protection.

Door of Chamber

Single open door, anti-explosion, anti-condensation electric heating device, vacuum auto-defog transparent window, window internal bulb.

Test Lead Hole

Φ50mm, enclosed with relative temperature preservation and heat insulation parts.

Power

AC220V±10%, 50/60HZ 3 phase (80L, 100L, 150L); AC380V±10%, 50/60HZ, 3 phase(225L, 408L, 800L, 1000L)

The third Party Certificate

Certified by ISO9001 quality control system and CE requirement