Plastic Profile Making WPC Profile Production Line , Fully
automatic PVC Profile Extrusion Line
Quick detail:
1. The line adopts special designed barrel and screw, mould and
working crafts to produce wood plastic composite products,
simplified as WPC products.
2. The extruder is of two steps mixing extruding or make the wood and
plastic into pellets first, then use extruder to process; power and
space saving, high capacity, stable extruding presser; the
pre-heating loader is installed on top of the extruder, it can
exhaust the moist remains in the wood power to make sure the
extruding section of extruder is full, and guarantee a better
plasticization result.
Description:
1. This production line is suitable to produce the PP, PE, PVC + wood
composite products, the WPC products are strong and durable, both
have the advantages of plastic and wood products, at the same time,
they overcomes the shortages of plastic products that is easily got
deformed, and the wood products can easily get corrosion, damaged
by worms, short service life, etc. They are popularly used as
packing case and wood-polymer tray; flooring panel, indoor and
outdoor decoration, plank flooring, pavilion and chair in park,
etc. The amount of wood power or fibers can reach to 50-70%.
2. 1. Suitable to PVC series profile, as ceiling, Deck, Floor, Plank,
Windowsill, Door frame and Board widely. Conical twin-screw
extruder is perfect, with PVC powder or granular material.Mould
designed by different kinds of profile customer required.upply
formula guide and staple raw material purchase.
Applications:
WPC decking application:
ourdoor application: wpc hollow decking, wpc solid decking, WPC
beam/joist/keel, wpc wall cladding panel, wpc bench/chair, wpc
fence/railing, upright post/pillar, wpc pavilion, wpc roof
profiles, etc.
Indoor application: door window profiles, furniture decorative
profiles, foaming profiles, etc.
Specifications:
| Items | YF180 | YF240 | YF300 | YF600 | YF900 | YF1200 |
| Max.width of board(mm) | 180 | 240 | 300 | 600 | 900 | 1200 |
| Drawing height(mm) | 150 | 150 | 150 | 150 | 150 | 150 |
| Drawing speed(KN) | 2 | 2 | 2 | 30 | 40 | 50 |
| Drawing speed(m/s) | 0-5 | 0-5 | 0-5 | 0-3 | 0-2.5 | 0-2.5 |
| Auxiliary equipment sum power(kw) | 35 | 35 | 30 | 30 | 40 | 45 |
| Cooling water consume | 6 | 6 | 6 | 9 | 12 | 15 |
| Compression air(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Competitive Advantage:
1) We give you suitable suggestions according to your actual need.
2) Technical support: long available life
3) Under the right operation way, the screw and barrel is for 10000
working hours.
4) Our expert will answer any inquiry within 48 hours and it will
be solved as soon as possible.
5) The customer can send the engineer to our company with training
6) Our engineer can be to the Buyer's company for installation and
testing the lines.
7) The seller provides you with complete technical support
documents and the relative drawings of the electric components
written in Chinese and English.
