RCAC45FS010 FLY/AIRWOLF 1 1/2" Remotely piloted Flange Pulse Jet
Valve
Description:
Very high performance diaphragm valve with flanged inlet port and
slide seal outlet port for easy valve installation and removal.
Available with integral pilot or as remotely piloted valve.Outlet
at 90°.
Operation
Recommeded time
between pulses:1 minute or greater
Recommended,
On time range:50-500ms
Installation:
1.Prepare inlet flange and blowtube pipes to suit valve
specification.
Avoid installing valves underneath the tank.
2.Ensure tank and Pipes are free from dirt,rust or other
particulate.
3.Ensure supply air is clean and dry.
4.Mount valves to inlet flange and blowtube to valves with all
seals in place.
Tighten flange bolts to 10Nm(7.4ft-ibs) Ensure blowtube is oushed
all the way into the valve outlet.
5.Tanks and pipes must be independently restrained from valve.
6.Make electrical connections to solenoid or connect RCA pilot port
to pilot valve.(RCA valve only).
7.Apply moderate pressure to system and check for installation
leaks.
8.Fully pressurise system.
9.Test fire and listen for proper actuation and crisp pulse noise.
Structure
Product show:
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex,
TNL will be normal ways, If you require use of a courier, we can do
it.
4. Also we can send by your delivery acount if you want.
After-sale service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
