DCG70/DCG71 series pressure control electronic die cutting machine
adhesive cut
Introduction
The DCG70/DCG71 series pressure control electronic die cutting
machine offers sample making solutions for the electronic industry
In addition to the function of the product of DCG50/DCG51 series,
the pressure control electronic die cutter is engineered with
pressure control tool head and laser positioning system, to realize
accurate control and positioning. Apart from optimal cutting
effect, our pressure control electronic die cutting machine also
improves the cutting quality. Thanks to the pressure control
technology, influence on the cutting quality caused by worktable
smoothness can be fully eliminated through pressure setting. So,
perfect through and half cutting effect can be obtained Applicable
for printing circuit board and electronic material, DCG70 series
adopts vacuum pump to hold the material, while the DCG71 electronic
die cutting machinery by electrostatic board. This product also
called electronic die cutting machine, die plotter, adhesive
cutting machine, film cutting machine and so on, according to the
different cutting material and application.
Main Features
1. Comparison with die cutting machine
Saving cost for mould making and knife sharpening; Convenient
adjustment
2. Comparison with laser cutting machine
Little black edge, Little scorch for thin material; Full
elimination of dazzling light, Low production cost
3. Special functions of pressure control electronic die cutting
machine
Capable of completing through and half cutting atone stroke;
Cutting accuracy up to 0.05mm, Plotting is available, Capable of
completing creasing and cutting in one time if equipped with
creasing tool; Accurate positioning for cutting various kinds of
electronic materials; The cutting knife is controlled by pressure
for perfect half-cutting effect.
Cutting materials:
3M double-side adhesive, photo-electric materials (shading,
diffuse, reflect), insulating material film switch.
Application:
Electronic die, laser die etc.
1. Easy to use
- our tables are easy to install and simple to set-up and use. The
table is programmed for use with our software, which apart from the
manual adjustment for the depth of the knife, will reduce the need
for hands-on setup of the table.
Specification:
| Model | DCG701209 | DCG700906 | DCG710906 | DCG711209 |
| Effective cutting area | 1200*900mm | 900*600mm | 1200*900mm |
| Configuration | Pen, pressure control knife, laser position |
| Way of fixing paper way | Vacuum absorbing | Electrostatic |
| Max speed | 1000mm/s |
| Cutting thickness | <1mm |
| Cutting precision | <0.01mm |
| Voltage | 220V 50HZ |
| Transmitting port | parallel port/RSC232 serial port |
| Instruction set | HPGL DXF |
| Occupy dimension(L*W*H) | 1635*1365*1080mm | 1335*1065*1080mm | 1635*1365*1080mm |
| Note | Other size can be customized. |
Samples
Optional
Video registration system
