F1/2"XF1/2" 150cm Long Colorful PVC Silver Wire Zebra Flexible
Weaving Explosion Proof Water Inlet Toilet Shower Hose
This Shower hose design to solve the high temperature, explosion
prevention, water leakage, easily broken problems.
Outer layer PVC anti abrasion, inhibit bacterial protection layer,
bright chrome plating,Middle layer adopt PEX materials, cold
resistant, heat-resistant material,inner layer use high strength
explosion proof netted fiber knitting. deformation and pressure
reversal in all directions,Brass nut, ensure tight docking, not
easy to broken.adopts high quality EPDM rubber ring and has good
sealing property.
It have advantages of good elasticity, good flexibility, easy
bending, winding prevention, skid proof, knot proof, durability,
health, environmental protection and meet drinking water standard.
1.Chrome Plated Brass Nut,2.EPDM Rubber washer 3.Brass inset 4.AISI
304 Stainless steel Fleeve 5.pvc Tube
6.Brass Nut, 7.Female Brass Screw
| Specification | Dia 14mm, F1/2"xF1/2" |
| OUTER DIAMETER | 8.2*14.50 |
| NDS NUTS | BRASS;STAINLESS STEEL |
| INSERT | BRASS;PLASTIC;NYLON;ALUMINIUM |
| Connected dimension | G1/2" |
| Material of outer tube | PVC |
| Finish of outer tube | PVC |
| Material of inner tube | PVC/EPDM inner tube |
| Material of nuts | Plastic/Brass |
| Working pressure | 12Mpa |
| Working temperature | Below 90℃ |
| Certificate | ACS,REACH,EN1113 |
| Quality assurance | 5 years guarantee |
| MOQ | 1000 pcs |
| Package | Bubble bag,blister,color box |
| Lead time | Within 20days after receipt of deposit |
| Payment term | T/T,L/C etc. |
| CERTIFICATION | ACS/CE |
Incoming Materials -> IQC ( Incoming Quality Cotrol ) ->
Materials to be stored in warehouse -> Production Dept. take the
materials -> Production Dept. makes pre-production sample ->
Sales Dept. confirms the samples -> Production Dept. start mass
production -> IPQC ( Input Quality Control ) -> LQC ( Line
Quality Control ) -> FQC ( Finished Quality Control ) -> OQC
( Outgoing Quality Control ) -> Goods ready for shipment
1.Cycle test:5000 cycles,according to DIN EN 1113
2.Work pressure:125 PSI
3.Test pressure:290 PSI
4.Burst Pressure:>290 PSI
5.Pull Strength:>500 N
6.Temperature:up to 90°C
Each one put into PE bag blister,50pcs/ctn.shipped in 25days after
receive deposit.
