CE certified 230V hot runner coil heaters
Hot runner coil heaters are made of nickel chrome resistance wire placed inside chrome
nickel steel tube filled with MgO powder and compacted for faster
and efficient heat transfer. The heaters are annealed to acquire
malleability for bending into any shape. Hot runner heaters with
built in thermocouple are also available. Hot runner bushes are
produced with hot runner heaters of different cross section with
inner brass and outer stainless steel cover.
Available in following cross section:
3.0 x 3.0, 3.3 x 3.30 3.5 x 3.5, 4 x 4, 4.2 x 2.2, 4.2 x 2.5 etc.
Any other cross sections can be manufactures and supplied on
request.
Features of Electric Coil Heater With Stainless Steel Braided
Leadwire
1. Standard sizes available with various cross section
2. Various Watt Density options available.
3. Robust Design with Choice of Terminal Exits
4. Available with built in Thermocouple
5. Designed for even heat profile.
6. Precision fit on Hot Runner Nozzles & Manifolds.
7. Highly Non-corrosive.
8. Maximum heat transfer due to more contact area.
9. Advanced Thermal Engineering.
TECHNICAL SPECIFICATION AND TOLERANCE:
| Sheath Material | Cr Ni-Steel |
| Insulation Material | MgO |
| Resistance Wire | Ni Cr 80-20 |
| Maximum Sheath Temperature | 700°C |
| Die Electrical Strength | 800V A/C |
| Insulation | > 5 M W |
| Thermocouple | J type (Standard) or K type |
| Length Tolerance (Straight) | 5% |
| Wattage Tolerance | + 10% (+ 5% Available Upon Request) |
| Resistance Tolerance | + 10% (+ 5% Available Upon Request) |
| Unheated Length | 35mm (Standard) |
| Dimensional Tolerance | Coil I.D + 0.1 to 0.2mm |
| Coil Length + 1mm |
APPLICATION:
1. Injection moulding machine nozzle
2. Hot Runner Nozzles & Bushings.
3. Packaging machineries
4. Hot runner Injection moulds.
5. Injection & Blow Moulding Machine Nozzles.
6. PET prefrom & Thin wall container Moulds
7. Hot runner Manifolds.
