YCQ-5L PET bottle blowing machine for 5 literes bottle
Main Feature
1.Stable performance with Advanced PLC
2.Conveying performs automatically with conveyor.
3.Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
4.High adjustability to enable the preheater to preheat performs in
shapes by adjusting the light tube and the length of the reflecting
board in the preheating area,and eternal temperature in the
preheater with an automatic thermostatic apparatus.
5.Optimization of the oven,suction and convulsion devices,cool the
preform surface.Waterway,air duct directly through the
device,double protect the screw neck
6.Each mechanical action has safety self-locking device,whe a
process fails, the program will automatically switch to the
security status.
7.Servo device for the material transfer and bottle perform
distribution, fast,reliable,and high stability.
8.Using high pressure and hyperbolic arm connecting rod
clamping,strong clamping force,speed and distance of clamp open are
adjustable.
9.Safe,reliable,and unique design of the position of valve to make
the air pressure diagram of the machine easier to understand.
10.Along with remotemaintenance systems,remote inspection
maintenance,solve the troubles for you.
11.Low rejection rete: less than 0.5 percent.
Technical Parameter
| Item | YCQ-5L-1 |
| Bottle type specification | Cavity | 1 |
| Theory output | 1200-1500 |
| Max.volume | 5L |
| Bottle mouth maximum overall diameter | 150mm |
| Bottle biggest diameter | 180mm |
| Bottle maximum height | 400mm |
| Power specifications | Light tube quantity | 32pcs |
| Light tube power | 1KW |
| Maximum heating power | 32KW |
| All electric machine installation | 35KW |
| Actual consumption | 17.5KW |
| Air pressure specification | Work pressure | 7-9kg/cm2 |
| Low-pressure gas consumption | 1200L/min |
| Blow bottle pressure | 25-35kg/cm2 |
| Higher -pressure gas consumption | 2000-2500Ltr/min |
| Forzen water specification | Work pressure | 5-6 kg/cm2 |
| Temperature range | 10℃ |
| Consumption | 4000kcal/hr |
| Forzen water flow | 30L/min |
| Machine specification | Size of the machine | 2.4x1.5x1.7 |
| Weight of the machine | 2ton |
Accessory equipment
1.MItsubishi PLC greatly improve the production efficiency,Also
it's very easy to fix.
2.Manipulator
Equipped with double sets, one set assist the appending machine put
the preform into machine. One set to take the bottle . Fully
automatic, convenient and efficient.
3.Pneumatic
Pneumatic device has the advantage:
1.Simple construction
2.Stable perform
3.Convenient
4.Easy to install and maintain
5.Security is higher than hydraulic system.
4.Clamping device
Equipped with SMC cylinder,high speed and quality. Crank-type
clamping make machine run smoothly and safely.
5.Cold water tube
Under the heating tube, prevent it form overheating
6.Air blower
Reduce the temperature of core, keep machine run smoothly.
Packaging & Shipping
Our Services
The sample service
1.we can send you the video of the running machine.
2.you are welcome to come to visit our company,and see the machine
running in our factory,we can pick you up from the station near our
city.
3.If we get the permission of the customer who has brought the
machines from us ,we can tell you their contact imformation,you can
go to vist their factory.
Customized service
1.we can design the machines according your requirements(materil
,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as
you know,we have been in this industry for many years.
After-sales service
1.we will provide the bill of load on time to make sure you can get
the machine quickly
2.when you finish the Preparation conditions ,our engineer will go
to your factory to install the machine ,and give you the operating
manual ,and train your employee until they can operate the machine
well.
3.we provide one year warranty with spare parts free.
FAQ
[1] Q: Are you a factory or trading company?
A: We are a factory.
[2] Q: Where is your factory located?
A: Our factory,near Shanghai & Ningbo port, is located in
Zhangjiagang,Jiangsu.
[3] Q: How about quality control in your factory?
A: “ Quality is the key point, do what customers need”
Eceng machinery factory focuses on quality,quality control from
beginning to the end. Every piece of goods is tested strictly
before packing and delivery.
[4] Q: How about guarantee ?
A: One year guarantee.
[5] Q: Do you provide bottle blow mould and air compresor ?
A: Yes , we provide complete system and you will no need to find
the suitable air compressor and chiller...etc..
[6] Q: What is the language of the PLC and touch panel?
A: Don’t worry, we will translate the language in English,Spanish
or any other language, to make sure you will have an easy operation
.
