PP PC Hollow Sheet Extrusion Line , PVC PP Hollow Grid Board
Production Line
QUICK DETAIL :
1. Specification of the PP hollow sheet:
This production line is used to produce the PP, PC hollow grid
sheet line.
PP finished sheet width 1220-2100mm, thickness: 2-14mm.
PC finished sheet width:1220-2100mm, thickness: 2-25mm.
2. Application of the plastic PP hollow sheet:
PC Hollow sheet is widely used as sun proof ceilings of office
building, hall, market, stadium, recreation center and public
facilities; weather shed of bus station, summer house, and corridor
of lounge hall;
Description:
1. PP PE sheet extrusion line
The features:
1.even plastication and agglomeration,
2.reliable quality,
3.wide application range,
4.long servicing life and direct conversion of powder into plastic
products.
5.Equipped with our company's different mould tools down stream
equipment, they can directly produce plastic products like pipers,
rods, plates and profiles.
2. Equipment List:
1. Single Screw Extruder(SJ120x35)
2. Hydraulic screen exchanger, Gear pump
3. T-die
4. Air knife
5. calibration unit
6. the first haul-off unit
7. Side trimming machine
8. anneal oven
9. cooling system by air
10. Second haul-off unit
11. transverse cutter
12. transmission unit
Specifications:
| Model | 45/90 | 51/105 | 55/110 | 65/132 | 80/156 | 92/188 |
| Power of drive motor(kw) | 15 | 18.5 | 22 | 37 | 55/75 | 110 |
| Screw diameter(mm) | Ø45/90 | Ø 51/105 | Ø 55/110 | Ø 65/132 | Ø 80/156 | Ø 92/188 |
| No. of screw | 2 | 2 | 2 | 2 | 2 | 2 |
| Rotational speed(N.W) | 34.7 | 34.7 | 34.7 | 34.7 | 34.7 | 34.7 |
| Screw torque | 3148 | 6000 | 7000 | 10000 | 14000 | 32000 |
| Capacity PVCpowder(kg/h) | 70 | 100 | 150 | 250 | 400 | 750 |
| Central height(mm) | 1000 | 1000 | 1000 | 1000 | 1100 | 1200 |
Technical and after-sales service:
The supplier the following technical and after-sales service
commitment
A) Provide on-site installation guide;
B) Responsible for the commissioning of equipment;
C) Responsible for the buyer's personnel mount guard before the
operation and maintenance training;
D) One year free warranty (due to the buyer's improper operation
caused by damage charge costs), and ensure the supply of spare
parts for a long time, only receive the cost.
E) Provide technical advisory services for a long time
