Infusion Tube Cutter Milling Machine
The PVC infusion tube is a widely used plastic material, which is
ground into PVC powder and can be used more widely for PVC.
PVC infusion tube mill is specially for PVC material grinding
equipment, PVC infusion tube mill features are as follows:
1, turbine planning, high output, small losses.
2, integrated planning, more manpower, easier to operate.
3, dust-free planning, to ensure environmental protection request.
4, sub cold, water-cooled double cooling, effectively reducing
material heating and equipment life.
PVC mill used more and more widely, look forward to the broad
masses of customers to purchase our PVC infusion tube mill.
Feature
1, Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution
effectively.
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to
maintain and replace blades.
5, Adopt double cold(water and fan),the inner temperature of body
is decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.
Performance Characteristics
The machine is our latest self-developed grinding mill; its
features are as follows:
- Compared with similar grinders, its output is greatly improved
(increased by 20%-50%) under the same power. It is energy-saving.
- The dust collector is added to effectively reduce dust pollution.
- The discharging of the main fan reduces labor intensity of
operating workers.
- The door cover of the host can be opened for convenience of
cutters.
- Wind and water cooling system are adopted to decrease the working
temperature inside the machine body, so the grinded material uneasy
for denaturalization and also conducive to grind heat sensitivity
plastics. For example, the part of PE and ABS can be grinded by
this machine.
- The powder mesh is adjustable (20-150mesh).
Technical Specification
| Electricity | 380V/3PHASE/50HZ |
| Power | Main motor | 37kw |
| Fan | 4kw |
| Main motor | Rotating motor | 24pieces |
| Fixed blade | 12pieces |
| Feeding | Automatic vibration |
| Colling mode | water | AIR-cooled |
| Rotating speed | minute | 3900rpm |
| Capacity | H | 80-250KG |
| Shaft | SKF | 6312 |
| Dusting | 9 bags |
| Protection equipment | High and low voltage protection；Overload protection |
