80 Mesh Plastic Milling Machine
Feature
1, Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution
effectively.
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to
maintain and replace blades.
5, Adopt double cold(water and fan),the inner temperature of body
is decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.
Usage
1, With water spray cooling system. it is suitable for processing
of thermal sensitive material. With unique water spray cooling
system. When the temperature of main machine is higher than setting
temperature, water spray automatically until the temperature
decreased normally.
Note: less of water spray into to machine will be dryed quickly
which will not affect material properties. It can be installed by
your requirements.
2, The raw material become power by vibration principle of
ultrasonic vortex wave pressure which is from the high speed
rotating of main shaft.
The material is conveyed to screening system by wind conveying. The
coarse materal is back to the milling chamber automatically, then
pulverized again.
3, The blade adopt high quality steel which is treated by
heating.after heat treatment, with good abrasion resistance. It is
suitable for continuous running.
4, This size of machine is small with compact structure, fully
sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
Technical Specification
| Model | YMMF-500 | YMMF-600 | YMMF-700 | YMMF-800 | YMMF-1000 |
| Grinding Disc Diameter(mm) | 500 | 600 | 700 | 800 | 1000 |
| Main Motor Power(kw) | 37-45 | 45-55 | 55-75 | 75-90 | 9-110 |
| Vibrating Sieve Power(kw) | 0.75 | 0.75 | 0.75 | 0.75 | 1.1 |
| Capacity(kg/h) | 100-300 | 200-500 | 250-600 | 300-800 | 400-900 |
