Turbine Pulverizer Machine
The turbine 500 pulverizer is the biggest type of pulverizer in 100
Ming Machinery Factory. The output value of the pulverizer is high,
and the main machine power is 37KW. It is the necessary equipment
for large factories.
The advantages of turbine 500 mill are as follows:
1, high output value, up to 250kg per hour
2, quick operation, more humane, belongs to environmental
protection equipment
3, fineness adjustable, the most fine up to 100 mesh
4, is the occupation of PVC plastic, not two choice
Advantages of plastic pulverizer machine(plastic milling machine)
- Safe and simple adjustment of cutting gap
- Low energy consumption and high throughput
- Innovative and energy efficient design
- Easy to maintain and control
- Wide range of accessories
- Regrinding coarse powder automatically
- Dual cooling system
Usage
1, With water spray cooling system. it is suitable for processing
of thermal sensitive material. With unique water spray cooling
system. When the temperature of main machine is higher than setting
temperature, water spray automatically until the temperature
decreased normally.
Note: less of water spray into to machine will be dryed quickly
which will not affect material properties. It can be installed by
your requirements.
2, The raw material become power by vibration principle of
ultrasonic vortex wave pressure which is from the high speed
rotating of main shaft.
The material is conveyed to screening system by wind conveying. The
coarse materal is back to the milling chamber automatically, then
pulverized again.
3, The blade adopt high quality steel which is treated by
heating.after heat treatment, with good abrasion resistance. It is
suitable for continuous running.
4, This size of machine is small with compact structure, fully
sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
Technical Specification
| Electricity | 380V/3PHASE/50HZ |
| Power | Main motor | 37kw |
| Fan | 4kw |
| Main motor | Rotating motor | 24pieces |
| Fixed blade | 12pieces |
| Feeding | Automatic vibration |
| Colling mode | water | AIR-cooled |
| Rotating speed | minute | 3900rpm |
| Capacity | H | 80-250KG |
| Shaft | SKF | 6312 |
| Dusting | 9 bags |
| Protection equipment | High and low voltage protection；Overload protection |
