The turbine 500 pulverizer is the biggest type of pulverizer in 100
Ming Machinery Factory. The output value of the pulverizer is high,
and the main machine power is 37KW. It is the necessary equipment
for large factories.
The advantages of turbine 500 mill are as follows:
1, high output value, up to 250kg per hour
2, quick operation, more humane, belongs to environmental
protection equipment
3, fineness adjustable, the most fine up to 100 mesh
4, is the occupation of PVC plastic, not two choice
Feature
1, Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution
effectively.
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to
maintain and replace blades.
5, Adopt double cold(water and fan),the inner temperature of body
is decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.
Working Principle
1. This type can grind all kinds Hard & Soft materials into 10-80
mesh powders in normal temperature.
2. A widely use range, PVC/PE/PP/ABS/PS/PA/PC Materials.
3. This machine has a much higher output, 2 or 3 times than normal
miller, equip with dust collector. An ideal energy saving machine
in plastic industries.
4. This miller includes automatic feeder, main engine, air fan
conveying, cyclone separator, automatic shaker screen, auto coarse
material milling ,high-efficiency dust collector system.
5. The sword adopts imported stainless steel, durable, can work
continously.
6. Knives can be adjusted easily, easily maintained and controlled.
7. Main shaft adopted SKF, matched with imported oil pump, can be
used about 3 years in normal usage.
FAQ
1. How to choose pulverizer?
It is depends on the plastic and capacity.
2. Does it support 7*24 hours working?
Yes, our motor is china top brand. 7*24 hours working is not a
problem.
3. What points should be noticed?
Blade disk quantity, Output size, Shaker size,Output capacity
