Allen Bradley Modules 2711-K10C15L1 2711K10C15L1 AB 2711 K10C15L1
NEW IN BOX
Product Description:
Bulletin 1305 drive parameter data can be programmed and displayed
using PLC’s, SLC’s or other logic controllers using an optional
Bulletin 1203 Communication Module. The amount of information that
can be transferred between the drive and controller is determined
by the DIP switch settings on theCommunication Module. Table B.1
illustrates the dip switch settings for Bulletin 1203-GD1 (Remote
I/O) communication modules. Dip switch settings for other
communication modules will be similar. Refer
to the appropriate communication module user manual for
details.Important: 1305 drives with firmware revisions FRN1.01 and
FRN1.02 are not compatible with Bulletin 1203 Communication
Modules. If connected, an error message will be indicated. The red
fault status and amber SCANport status LED’s on the front of the
module will flash simultaneously.
Related Product Recommendation:
| 1440-SPD02-01RB | 1442-PS-0850E0010N | 1794-TB32 |
| 1440-TPR06-00RE | 1442-PS-0860E0005A | 1794-TB3G |
| 1440-TPS02-01RB | 1442-PS-0860E0005N | 1794-TB3S |
| 1440-TTC06-00RE | 1442-PS-0860E0010A | 1794-TBN |
| 1440-TUN06-00RE | 1442-PS-0860E0010N | 1794-TBNF |
| 1440-VAD02-01RA | 1442-PS-1104M0510A | 1794-VHSC |
| 1440-VDRP06-00RH | 1442-PS-1104M0510N | 193-ECPM3 |
| 1440-VDRS06-00RH | 1442-PS-1116E0510A | 2094-AM01 |
| 1440-VDRS06-06RH | 1442-PS-1116E0510N | 2094-AM02-S |
| 1440-VLF02-01RA | 1442-PS-1805M0510A | 2094-BC01-M01-S |
| 1440-VSE02-01RA | 1442-PS-1820E0510A | 2094-BM05 |
| 1441-DYN25-2C | 1442-PS-2505M0510A | 2094-BMP5-S |
| 1441-DYN25-CAP | 1442-PS-2507N0010A | 2098-DSD-020X |
| 1441-DYN25-CBL2CH | 1442-PS-2520E0510A | 2098-DSD-HV100-SE |
| 1441-DYN25-CBLHS | 1442-PS-5005M0010A | 2706-M1N1 |
| 1441-DYN25-CD | 1442-PS-5020E0010A | 2706-P22R |
| 1441-DYN25-M4CH | 1485C-P1A150 | 2707-L40P2 |
| 1441-DYN25-MBAL | 1485C-P1A300 | 2711-B5A8X |
| 1441-DYN25-MBMP | 1485C-P1A50 | 2711-B6C1 |
| 1441-DYN25-MFRF | 1485C-P1A500 | 2711-B6C10 |
| 1441-DYN25-MREC | 1485C-P1BS200 | 2711-K10C1 |
| 1441-DYN25-MRUC | 1485C-P1BS420 | 2711-K10C15L1 |
| 1441-DYN25-PS | 1485C-P1BS75 | 2711-K5A5 |
| 1441-DYN25-Z-2C | 1485C-P1CG150 | 2711-T10C15 |
| 1441-PEN25-BAT | 1442-EC-1840A | 152H-C135XBD-50 |
| 1441-PEN25-HS | 1442-EC-1880A | 152H-C135XBD-50-8B |
| 80190-600-01-R | 1442-EC-2540A | 152H-C135XBD-50-8L |
Product's Character:
The name of the tag will reflect the name you assigned the earlier.
The "C" sub-group contains the contents of the configuration
assembly, which is not currently used in the 1203-CN1. The "O"
subgroup contains one entry for each word of output data you
configured, and the "I" sub-group contains one entry for each word
of input data you configured. The "O" sub-group corresponds
directly to output data for a PLC-5 described on page 5-2 of the
1203-CN1 user manual (i.e., for most common configurations, word 0
is the logic command, word 1 is the speed reference, words 2 and 3
are the first pair of data links, etc.). The "I" sub-group is
similar to the input data for a PLC-5, except that it is shifted by
two words (i.e., word 2 is the logic status, word 3 is the speed
feedback, etc.). Words 0 and 1 of the "I" sub-group represent
network status data sent by the 1203-CN1 but not processed directly
by the ControlLogix processor. At this point, I/O between the
ControlLogix processor and the 1203-CN1 should be configured and
running, and the meaning of the various I/O words should be
understood. If you need further assistance in configuring I/O,
please contact technical support.
1793-IB4S Digital Input Module AB
1793-IE2XOE1 Analog Combo Module AB
1793-IE2XOE1S Analog Combo Module AB
1793-IE4 Analog Input Module AB
1793-IE4S Analog Input Module AB
1793-IV16 Digital Input Module AB
1793-IV16S Digital Input Module AB
1793-OB16P Digital Output Module AB
1793-OB16PS Digital Output Module AB
1793-OB4P Digital Output Module AB
1793-OB4PS Digital Output Module AB
1793-OE2 Analog Output Module AB
1793-OE2S Analog Output Module AB
1793-OV16P Digital Output Module AB
1793-OV16PS Digital Output Module AB
1793-OW4 Relay Contact Output Module AB
1793-OW4S Relay Contact Output Module AB
1794-ACN15 ControlNet Adaptor AB
1794-ACN15K ControlNet Adaptor AB
1794-ACNR15 ControlNet Adaptor AB
1794-ACNR15XT ControlNet Adaptor AB
1794-ADN DeviceNet Adaptor AB
1794-ADNK DeviceNet Adaptor AB
1794-AENT Ethernet Adaptor AB
1794-AENTR Ethernet Adaptor AB
1794-AENTRXT Ethernet Adaptor AB
1794-APB Profibus DP Adaptor AB
1794-APBDPV1 Profibus DP V1 Adaptor AB
1794-ASB 96265871,960404877 Remote I/O Adaptor AB
1794-ASB2 Remote I/O Adaptor AB
1794-CE1 Extender Cable AB
1794-IA16 Digital Input Module AB
1794-IA8 Digital Input Module AB
1794-IA8I Digital Input Module AB
1794-IB10XOB6 Digital Input/Output Module AB
1794-IB10XOB6XT Digital Input/Output Module AB
The use of the product:
1.plastic machinery,
2.electronics manufacturing,
3.automobile manufacturing,
Product's advantages:
1.Experienced technichal support team.
2.365 days warranty for all the goods from us.
3.Customer service in 1-4 hours. If there's any question, please
contact with our sales.
Our advantages:
1.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most items.
2.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase
from our store are not of perfected quality, simply return them to
us for replacement or refund.
Frequently Asked Questions:
1.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
2.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
3.Q:Does Moore test the products before shipping ?
A:Yse , we have professional technology staff to test the goods
before
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
