High Speed Mixer/ PVC Mixer Machine/ Plastic Color Mixing Machine
Introduction
Developed on the basis of advanced technique, the SRL-Z series
mixer is mainly used for drying, dewatering and mixing before WPC
production. The spindle is with good sealing without material
leakage. The heating mixer has the heating fuction of self-friction
electric heating. The pot cover is adopted double-sealing layer.
The cooling mixer is also adopted arched pot cover and
specially-designed blade, which had been passed the test of static
balance and dynamic balance. Combined with the heating mixing
technique and cooling mixing technique, the SRL-Z mixer is the
ideal processing equipment in WPC production. The material after
being heat-mixed would go into cooling mixer automatically, then
the air would be exhausted and the material wouldn't be blocked.
SHRL high-speed hot and cold mixing machine is developed on the
basis of digestion and absorption of overseas advanced technology,
and it is mainly used for material-prescribing, mixing, coloring
and desiccating various kinds of resin and PE, PP, PVC, etc. And it
is also capable of desiccating plastic of ABS and polycarbonate and
so forth.
Combining technics of hot mixing with cool mixing, this unit
ensures that the material automatically goes into the cold mixing
stage after being hot mixed, and it can remove residual gas,
meanwhile preventing the material from agglomerating.
Our Services
1. We will provice the Feasibility Analysis Report for the
wood-plastic project.
2. We will provide the model selection and technical parameter for
wood-plastic machinery.
3. We will provide the design for the plant and electric power
accounting for the facilities.
4. We will provide the design for wood-plastic formular acording to
the product requirements.
5. We will provide the technology of wood-plastic product surface
treatment.
6. We will provide technique training for operator.
7. We will provide solution for the practical problem during the
production.
8. We will install and test the machine for free.
9. We will provideturnkey project to customers.
Service before order
1. Supply the Turnkey Project, including the machine layout and
workshop layout.
2. Supply the Free samples for reference and check.
3. We produce the spiral/corrugated pipe mould by factory, we can
produce different size of mould as for your drawing.
Service after order
a. Test the machine before delivery freely.
b. Engineers to go to install and test the machine in customers'
factory.
