MITECH Industrial NDT Digital Imaging System X-Ray Flaw Detector
XXHA-1605
Product Overview
MITECH inflatable X ray generator is a portable X-ray flaw detector
for X ray nondestructive testing, it uses the the difference of
degree of absorption to material thickness to detect the internal
defects of materials. The detector has the advantages of small
size, light weight, easy-carry, simple operation, especially
suitable for cooperatively working with power generation units in
various harsh environments ; film material can directly display the
size and shape of internal defects in the workpiece , the defects
image reflected on the film are true and clear and it can be
long-term preserved; Without special requirements to the surface
roughness of the workpiece . the effect of material grain size has
little effect on the test results, applied to the internal defect
detection of various materials. With strong anti-interference
ability, good stability, reliable operation, it has obvious
advantages in the construction and high-altitude operations, is
widely used in shipbuilding, machinery manufacturing, aviation,
railway, pressure vessels, boilers, oil, Chemical industry,
national defense industry and other industries, is the ideal
equipment for nondestructive testing.
Glass Tube Circumferential Cone Target Series
| Model | Output voltage(KV) | Capacity(kW) | Focus dimension(mm×mm) | Radiation angle | Maximum penetration(Q235) | Generator weight(kg) | Generator dimension(mm×mm×mm) |
| XXHA-1605 | 60-160 | >1.5 | 1.0×2.5 | 360°×40° | 15 | 15 | 220×220×630 |
| XXHA-2005 | 80-200 | >2.0 | 1.0×2.5 | 360°×40° | 24 | 23 | 280×280×680 |
| XXHA-2505 | 130-250 | >2.5 | 1.0×2.5 | 360°×40° | 34 | 33 | 320×320×750 |
| XXHA-3005 | 150-300 | >3.0 | 1.0×3.5 | 360°×40° | 40 | 40 | 320×320×840 |
Working Conditions
Environment temperature: -25℃-40℃
Relative humidity: no bigger than 85%
Safe work pressure: 0.35-0.50mPa
Note, Do not use when the pressure is under 0.35mPa
Standard Configuration
| NO. | Name | QTY | Remarks |
| 1 | X ray flaw detector | 1 | |
| 2 | controller | 1 | |
| 3 | Connection cable(10 cores) | 1 | |
| 4 | Power cable(2 cores) | 1 | |
| 5 | Ground lead | 1 | |
| 6 | Fuse(3A) | 5 | |
| 7 | Attached files | 1 | |
The Emission of X-ray
Figure 1 Figure 2
Figure 3 Figure 4
Figure 1:Glass tube circumferential target generator
Figure 2:Ceramic tube directional generator
Figure 3:Glass tube circumferential cone target generator
Figure 4:Glass tube directional generator
Generator Structure
1 Gas pressure gauge 2 Cable line socket
3 Caution light 4 X ray generate area
5 Cooler fan
Controller Structure
1 Fault code and exposure chart 2 Standby light
3 HV light 4 Digital display
5 Time knob 6 KV presetting knob
7 “HV on” key 8 “HV off” key
9 Power switch 10 Connection cable socket
11 Power cable socket 12 Earthing wire
13 Fuse holder(3A)
The main parts in the controller are:KV control panel, mA control
panel, microcomputer control panel, protection board, Controllable
silicon high voltage module, LC filter, main,assistant silicon
control inverter system. The inner controller has cooling fans,
vent-windows on the side and back
