UN/DOT 38.3 Vibration Table Testing Equipment for Battery Testing
shock and vibration testing standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Applicable Industries: Automotive, Electronics, Aviation, Vessel, Telecommunication,
Military Industry, Measuring Instrument etc.
Features:
- Strength of the suspension system and linear motion guiding, strong
carrying capacity, good guiding functions, high stability.
- Perfect performance on amplitude variation.
- High efficient on D Class power conversion, 3 - Sigma peak current,
provide the optimization of power consumption and minimum harmonic
distortion.
- Rapid self-test diagnostics and chain safeguard, high high safety
and reliability
- Air gasbag isolation damping device realize the the vibration table
with no need for special foundation. Perfect reappearance vibration
waveform and the reduction of vibration transmission
- Different application on the vertical and horizontal tables.
- Simple operation for the controller.
Working Principle:
Specifications: EV103-EV220
| Model | EV103 | EV203 | EV106 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/25 | VG300/40 | VG600/25 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 2-4000 | 2-2500 | 2-3000 | 2-3000 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 300 | 300 | 600 | 600 | 1000 | 2000 |
| Max. Displacement (mmp-p) | 25 | 38 | 25 | 50 | 50 | 50 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 200 | 120 | 180 | 200 | 200 | 200 |
| Payload(kg) | 110 | 120 | 200 | 200 | 300 | 400 |
| Armature Mass(kg) | 3 | 3 | 6 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ150 | φ200 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 460 | 460 | 720 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*560*670 | 750*555*670 | 800*600*710 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp3k | Amp6k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 250 | 250 | 320 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
Utility
Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 8 | 9 | 18 | 20 | 25 | 35 |
Shock and Vibration Battery Testing Solutions
Batteries power many of the things that enable and fulfill our
everyday lives. As our lives have become less tethered – devices
have surely become more efficient – but also – batteries now
provide higher energy densities.
Think for a moment about shipping all these batteries…In very real
terms – a shipment can represent a huge energy density – and in a
mishap – that energy could be released in a very undesirable way.
Most batteries undergo transportation simulation tests to comply
with international shipping standards. This is especially true for
lithium ion batteries. To ensure safety during shipment, lithium
batteries must be tested per UN/DOT specifications. The UN Manual
of Tests and Criteria section 38.3 (UN/DOT 38.3) outlines the tests
for lithium batteries. Labtone has the Test Equipment and expertise
to perform (UN/DOT 38.3) tests–T3 (Vibration), T4 (Shock), and T6
(Impact).
Transport hazards are not the only dynamic conditions that battery
designs must survive. When a portable electronic device sheds it
packaging upon receipt, you may find the everyday use environment
to be more rigorous than the shipping environment. In an automotive
electric / hybrid application, batteries will be exposed to endless
vibration as a matter of course. A variety of industry
specifications exist for testing batteries to ensure that they can
stand up to this type of use:
- IEC 62133 (Vibration, Drop, Shock)
- SAE J2464 (Shock, Drop, Data Acquisition)
- UL 2054 (Shock, Vibration)
- UL 2202 (Vibration, Drop)
- UL 2231 (Drop, Shock, Vibration)
Detalied Pictures:
shock and vibration testing services :
Presales
- Technical consultation: test method, laboratory planning and
suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning
and test run.
- Calibration (when Third Party’s verification is required).
After-Sales
- Technical training: operation of equipment, daily maintenance,
common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible
in order to eliminate equipment and anthropogenic hazards. This is
to ensure long term and stable equipment operation as well as
delivery of latest technical information.
- Technical support: special paid services are provided according to
customer’s needs.
