Large Internal Space Rotary Ash Cooler Inlet Slag Device Easy Maintain

Inlet the slag device ,Its used for the Rotary Ash Cooler:

Origin: China

Brand: Qingdao Kechengyi

Introduction: slag into the device by the slag into the mouth, into the tube, slag, sealing device, etc into slag enclosure, boiler slag through the tube into the slag slag inlet flow into the cylinder of slag cooler, into a negative pressure tuyere slag enclosure, sealing device through the screw to prevent slag ash leakage.

Installation Instruction of the Rotary Ash Cooler:

Place the ash cooler on the flat ground with bearing capacity higher than 6000Pa, (anchor bolt is not necessary), then place embedded iron on the ground for the four corners of the ash cooler stand, and weld the locating iron on the embedded iron to prevent moving when the ash cooler is set on the right place

When the foundation is higher than the ground, pour two longitudinal or four transverse plain concrete strip foundations with strength more than C30 on the ground. When the left type and right type ash cooler are arranged next to each other, for the convenient maintenance and repair, the drive motor should be arranged at the outer side, which means put the left type ash cooler at the left side, and the right type at the right side.

GTL series single drum ash cooler

Advantages:

Large output, which can reach 80t/h at the maximum

Large internal space, which is convenient for inspection and easy for maintenance with a low cost.

High-temperature resistance compensator:

1, High temperature resistance, and the temperature≮1200℃

2, Large compensation, which can satisfy the X and Y direction expansion of 300MW, and 600MW CFB boiler

3, Good wearing resistance, especially suitable for high temperature ash/slag condition, and the service life is no shorter than 2 years

4,Convenient to install, and easy to maintain.

Company Profile：

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. is a comprehensive enterprise focusing on equipment research and development, equipment manufacturing, and service, especially for the thermal power plant auxiliary equipment and environmental protection equipment. The company has rich design and manufacturing experience and many successful performances on the ash handling, slag handling, dust removing, desulfurization and denitration for CFB boiler and pulverizing coal boiler.

  Qingdao Kechengyi Environmental Protection and Electric Power Technology Co., LTD. has established perfect quality control system and carried out the manufacturing and management of the equipment according to the requirements of ISO9001 quality management system; In order to have better participation in the international thermal power field, the company has obtained relevant qualifications to directly import and export the power plant equipment and spares. The company has excellent research and development team and experienced production team, which makes the annual production capacity reaches 4000 tons. The products have been adopted by more than hundreds of power plants at home and abroad for the excellent product quality and after-sales service.

  Company's main products:

  Drum type ash cooler, bucket conveyor, bucket elevator, embedded scraper conveyor, scraper slag conveyor, dry type slag conveyor, hydraulic shut-off gate, single roller slag crusher, steel ash bin, slag bin, de-watering bin, electric feeder, wetting mixer, dry type bulk loader, pressure relief valve, dense phase pneumatic ash conveying system, dilute phase pneumatic ash conveying system, coal ash separation system, pneumatic double gate valve, pneumatic swing valve, cone pump, material seal pump, coal ash separator, cyclone collector, wear-resistant ceramic elbow, tee joints, and various valves.

  Adhering to the "first-class design, first-class products, first-class service" principle, the after-sale service department of the company can provide excellent pre-sale service, sales service and after-sale service to the customers.

  1、 Pre-sale service: dealing with various consultations and questions, and sending professional technical personnel to do on-site investigation to provide preliminary design plan and reasonable suggestions.

  2、 Sales service: the engineering technicians will keep contact with the customers positively so as to adjust the design plan, production schedule, and delivery time immediately based on the needs of the customer and report the progress to them at any time, and do all the best to meet the requirements of customers.

  3、 After-sale service: implement “provide on-site service in 24 hours system”, which means the personnel will arrive the customers’ working site to provide service within 24 hours after we got the call of the customers (in China). We will provide high-quality products and good service to the customers and sincerely welcome new users come to visit our company at the same time.