EPRO PR6424/012-000 CON011 PR6424/012 000 CON011

EPRO PR6424/012-000 CON011 PR6424/012 000 CON011

Product Description:

The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground

conductor must be solidly connected to the motor case ground. Shielded or armored cable may be used to guard against radiated emissions from the motor cable. The shield or armor should be connected to the drive ground terminal and the motor ground as outlined in the Grounding section of this Installation

chapter. Common mode chokes are recommended at the drive output to reduce the common mode noise. An RFI filter can be used and in most situations provides an effective reduction of RFI emissions that may be conducted into the main supplylines. If the installation combines a drive with sensitive

devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

After starting RSLogix 5000 and either starting a new project or opening an existing project, make sure
that you are OFFLINE with the ControlLogix processor. I/O configuration is only available when offline.
If you have not already defined the contents of your ControlLogix chassis under your project's "I/O

Configuration" folder, you will need to define the ControlNet bridge module at a minimum. Use the right
mouse button to click on the "I/O Configuration" folder, then choose "New Module" from the pop-up menu.From the dialog box that appears, choose the ControlNet bridge of the type (1756-CNB or 1756-

CNBR)and series that you are using. In the next screen, you will need to name the ControlNet bridge and
indicate its position in the ControlLogix chassis (slot 0 is the leftmost).After defining the ControlNet bridge, use the right mouse button to click on the ControlNet bridge under"I/O configuration", then choose "New Module" from the pop-up menu

MKS pressure controller type 652 self tuning pressure controller 652D-BB

CHNT NB1-63 C1, NB1 CIRCUIT BREAKER

AMAT 3300-05050 Ftg Nipple Rdcr NW50xNW40 1.576LG SST

AMAT cable, 30 ft. 0226-31562. 4 pin. EMO cable

New Novellus 10-189321-00 VCR 90 Degree Connection

Edwards 45° Vacuum Elbow, C10512405, new, partially opened

Potter and Brumfield KUP-14D55-24 Lot of 2, 3 Pole relays 24VAC

Stec SEC-4400 MFC, SEC-4400M NF3 Gas, 500 SCCM Range, S4879

ASCO RED-HAT VALVES F3209AK

5 NEW AMAT 0020-77330 DRIVE SHAFT BEARING SPACER

NEW Novellus 17-114726-00 Mounting Plate

3 RF Coax Bulkhead Silver Plated, AMP 225409-1

Horiba stec LF-310A MFC, LF-310A-EVD, TEB, 0.5 g/min, S7865

Horiba stec LF-310A MFC, LF-310A-EVD, TEPO, 0.25 g/min, S0403

Horiba stec LF-410A MFC, LF-410A-EVD, TEOS, 7.0 g/min, AMAT 3030-08008, S0702

Horiba stec LF-310A MFC, LF-310A-EVD, TEPO, 0.2 g/min, AMAT 3030-05748, S0101

Horiba stec LF-310A MFC, LF-310A-EVD, TEPO, 0.25 g/min, AMAT 3030-07719, S0201

Dwyer Photohelic Series 3000MR Differential Pressure Switch/Gage 0-2 inches

HP 0950-3807 AC Adapter V 85

2 LAM 701D-054242-007 Lift Shock Industrial Gas Spring GS 100799-1

Aera TC FC-PA7800 MFC 100 sccm NH3, Novellus 22-363308-00

AMAT 0200-10183 Bias Plug, Quartz Lowered Cathode

3 new Banner SE61EMHS photoelectric high speed emitter 25971. sold as lot of 3.

Datalux B735, LC530/65-136217-AS, PCB, 350-005

UNIT MFC, UFC-1210A, N2 gas, 20 SLM Range.

ENI RF GENERATOR OEM-12B-02 power generator, OEM12B-02 ; AMAT 0190-70080

Novellus 27-402452-00 O'ring

STEC SEC-4550 MFC, N2, 30 SLM, used

ELAN SRB-NA-R-C.14/5e-24VAC Safety Relay

Wheel Guide Rail 201-093

MKS baratron 127AA-00001E, 1 Torr, S57317-2-1E

FINDER 8241 0240 A1-A2, 82.41 MONO FUNCTION MODULAR TIMER SPDT-CO

STEC LF-A40M-A-EVD, TEOS 4g/Min, 3332400050

NEW AMAT 0010-37828 Assy Display Board, HF.RF Generator

NEW AMAT 1400-01325 pressure sensor 0-1MPA 1/8PT 3wire 3m LG, SMC PSE520-T01

NEW AMAT 0090-77009 Assy LVDT ZT-910/900 PM2, Sensotec 060-3590-06, ID 327865

AMAT 0010-12123 Assy PLC Controller 200MM Wald CH. A OR

AMAT 0010-08173 ASSY, SOURCE CONTROL SCA, DPN, 200MM, SSGSE-00002

3 AMAT 0200-09373 West Coast Quartz Cover Ring Quartz Alum 150mm New

AMAT 0010-13389 FORTH POSITION BRACKET ASSEMBLY, BDS6 SH

Astex D13449 Microwave magnetron, D13604 waveguide, C13477 isolator, AMAT HDP

The use of the product:

1.365 days warranty for all the goods from us.

2.Customer service in 1-4 hours. If there's any question, please contact with our sales.

3.Experienced technichal support team.

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.