200L High Efficiency Integrated Copper Coil Powered Pre Heated
Solar Water Heater For Homes
Description:
1) Copper coil as twice heat exchanger makes a pressurized and
instant solar water heating system, tap water connects directly
with copper coil for continuing water supply.
2) Hot water output is instant continuous and not limited by water
storage tank
3) An assistant tank can be quipped for storage tank water refill
and makes it a completely automatic running system
4) Instant water heating ensures more clean and convenient hot
water use.
SPECIFICATION:
1. Material of Inner Tank: SUS304-2B Stainless Steel, thickness:
0.4mm.
2. Material of Outer Tank: SUS304-2B Stainless steel, thickness:
0.34mm
3. Copper Coil: Diameter: 12mm, thickness: 1mm, length: 40 meters
Diameter of the inner & outer tank: 480mm/380mm
4. Heat Preservation: Polyurethane foam with 55mm thickness
5. Magnetic-controlled Al-N-Al splash all glass evacuated
heat-collecting tubes
6. Specification: 58mmx1800mmx30 tubes
7. Material of Support: Galvanized steel: Thickness 2.0 mm
Applications:
Domestic hot water for shower, washing
WORKING PRINCIPLE:
1. The vacuum tube collector absorb the heat energy to heat the
water in heat storage tank,
2. When using the hot water, the cold water flows through the
inlet, the copper coil absorb the heat then transfer into the cold
water, so that the temperature rise up ceaseless,
3. For the original features of the copper coil, the water
temperature of the outlet is close to the water temperature of the
water tank, so the high pressure of the cold water into the copper
coil and absorb the temperature, at last the water can be used.
| Description | Pre-heated Pressurized Solar Water Heater |
| Material of out tank | Galvanized Steel |
| Material of inner tank | Food grade 0.4mmSUS304-2BStainless Steel |
| Tank insulating layer | 50mm high-density polyurethane foamed |
| Inlet and outlet hole | Male G 1/2, 3/4 |
| Max pressure | 0.6 Mpa |
| Solar collector tube | 3.3 Borosilicate glass with AU/N/AL coating |
| Thickness of glass tube | 1.6mm |
| Vacuum tube tightness | 0.005 Pa |
| Absorption | As=0.93-0.96(AM1.5) |
| Emission ratio | 0.04-0.06(80C± 5C) |
| Idle sunning property parameters | Y=220~260m2. C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(m2. C) |
| Bracket: | Galvanized steel : thickness 1.5mm |
| welding: | Argon arc welding |
| fastening pieces: | Made of stainless steel screw |
| Feeder tank | 5L galvanized steel |
Advantage:
1. We get instant clean and pressure hot water from copper coil
outlet;
2. Simple structure with very easy installation and pipeline
connection;
3. With copper coil exchanger we do not need to locate the solar
water heater at the house top;
4. PASSION argon-arc welding and in-house testing ensures a long
lasting storage tank without any leakage problem;
5. PASSION makes a high-density integral PU insulation for the tank
with heat preservation as long as 72~80 hours;
6. The solar vacuum tube is made of high borosilicate glass with
stable performance and no blasting problem for 15 years;
7. The support frame is designed for slope and flat roof
installation, aluminum alloy with stainless fastener has no rusty
problem;
PDF Catalogue of Pre-heated Solar Water Heater with Heat Exchanger.
PT-P Pre-heated Solar Water Heater with Heat Excha...
