200L Compacted Colored Steel Tank Non Pressured Vacuum Tube Solar
Water Heater For Home
| Vacuum tube | Spec. (mm) | Φ 47× 1500 Φ 58× 1800 |
| Tube (pcs) | 15 / 18 / 20 / 24 / 30 / 36 |
| Material | 3.3 Borosilicate glass, magnetron spluttering selective coating |
| Coating | AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN |
| Water tank | Capacity | 70L- 500L for inner water tank |
| Inner tank | Food-grade stainless steel plate SUS304-2B |
| Insulation | High-density polyurethane integrated foam-forming 50~60mm |
| Tank shell | Color steel plate |
| Bracket | Spec. (mm) | 1.2 ~ 1.5mm thickness |
| Material | Hot-dip galvanized steel plate |
| Accessories | Stainless bolts & nuts, Silicon rubber seal, Dustproof rubber seal,
Plastic pipe holder |
| Optional device | Electrical heater, Intelligent controller / Assistant tank, Anod
magnesium bar |
| Tilt angle | 25° ~ 50° |
| Water output | 45-95 °C |
| Hail resistance | Φ 25mm diameter |
Working Principle:
Because of the larger proportion of hot water than cold water, cold
water flows downward and hot water goes upward.
The water will be heated continuous between water tank and vacuum
tube.
In other words, hot water always floats on cold water.
The hot-water flows to the water tank from the vacuum tubes.
Because of the proportion, cold water flows to vacuum tubes from
the water tank.
The cold water is heated in vacuum tubes.
After it becomes hot water, it flows to water tank again.
The water circulates constantly between water tank and vacuum
tubes.
The cold water in water tank will be hotter and hotter.
Finally, all cold water will be heated to be hot water. This is the
heating course of cold water.
Specifications:
1) Vacuum tube: borosilicate glass 3.3, AL-N/AL or Al N/Al N-SS/Cu
selective absorbing coating
2) Vacuum tube size: Φ47x1,500mm / Φ58x1,800mm
3) Vacuum tube qty: 10 / 12 / 15 / 18 / 20 / 21 / 24 / 25 / 30 / 36
pcs
4) Heat insulating layer: 50mm / 55mm / 60mm thickness polyurethane
foam
5) Heat preservation: 72hrs
6) Inner tank: made of SUS304-2B food grade stainless steel
7) Thickness of inner tank: 0.35-0.5mm
8) Outer tank: stainless steel 304
9) Tank diameter: 410mm / 420mm / 460mm / 470mm / 480mm
10) Tank capacity: 80L-300L
11) Bracket: stainless steel
12) Thickness of bracket: 1.2-1.5mm
13) Hail resistance: 25mm
14) Optional accessories: assistant tank, electrical heater,
controller.
Notice:
1)The angle of the frame can be changed in production as the local
latitude condition of the customers. We can design the suitable
angle for the customers
2) We offer the spare accessories and tubes for your order for free
3) We can offer the different material of water tank,frame and
tubes according to your request
4) We offer the fittings of this system,like immersion heater,water
supplier,magnesium and so on.You can buy according to your
requirement.
Scope of Application:
Non Pressurized Solar water heaters popular in Asia,Africa,torrid
zone and warm area.
PDF Catalogue of Integrative Non Pressurized Solar Water Heater.
PT-N Integrative Non Pressurized Solar Water Heate...
