High Efficiency Red Copper Pipe Flat Panel Thermal Solar Collector
Black Chrome Coating Absorber
Application
Our flat plate solar thermal collector is suitable for residential
or commercial solar water heating projects, such as hot water for
real estate, hotel, factory hospital, school, swimming pool,
central heating, floor heating, etc.
Warranty
6 years international warranty for Flat Plate Solar Collector due
to original quality problems.
Component Description
Flat Plate Panel Solar Collector is one of the most wide-used solar
collector with high efficiency.
The selective coated absorber sheet absorbs up to 95% of available
sunlight converting into usable heat.
The heat is normally absorbed by water in the loop, or a
freeze-resistant water mixture which is used to supplement hot
water heating or house air heating.
Glazing Glass:
Toughened low-iron glass (glazing) protects the absorber from the
outside environment while allowing through more than 91% of
sunlight.
Absorber:
A thick sheet of copper or aluminum plate is coated with a highly
selective anodic oxidation coating that is extremely efficient at
absorbing sunlight and converting it into usable heat.
The absorber sheet is ultrasonically welded to the copper riser
pipes.
Insulation:
The insulation helps reduce heat loss from the sides and back of
the collector.
High-density polyurethane and glass wool can greatly reduce weight
and heat lost of the collector.
Riser & Header Pipe
Conforms to international standards, the header and riser pipes are
brazed together to form a harp shaped heat exchanger that the solar
system water or fluid circulates through.
The absorber sheet is ultrasonically welded to the riser pipes,
thus transfers heat to the water or heat transfer fluid.
Casing:
Anodized aluminum alloy sheet seals the back and frame of the panel
and adds to the rigidity of the collector.
The rails in the frame are designed for easy mounting attachment.
Specification
| Model No. | PT-C01 | PT-A02 | PT-B02 | PT-C02 |
| Dimension L×W×T(mm) | 2000×1000×70 | 2000×1000×80 | 2000×1000×90 | 2000×1000×100 |
| Gross Area(m2) | 2 | 2 | 2 | 2 |
| Efficiency Area (m2) | 1.82 | 1.82 | 1.82 | 1.82 |
| Gross Weight of Collector(kg) | 47±3 | 55 ±3 | 47 ±3 | 55 ±3 |
| Transparent Cover |
| Number of Cover(pc) | 1 | 1 | 1 | 1 |
| Dimension L×W(mm) | 1975 × 975 | 1975 × 975 | 1975 × 975 | 1975 × 975 |
| Cover Material | Float Glass / Low-iron Glass | Float Glass / Low-iron Glass | Float Glass / Low-iron Glass | Float Glass / Low-iron Glass |
| Cover Thickness(mm) | 3.2 | 3.2 | 3.2 | 3.2 |
| Cover Transmission | 91% | 91% | 91% | 91% |
| Absorber |
| Dimension L×W(mm) | 1840 × 956 | 1840 × 956 | 1840 × 956 | 1840 × 956 |
| Material | Red Copper | Red Copper | Red Copper | Red Copper |
| Surface Treatment | Black Chrome | Blue Titanium | Black Chrome | Blue Titanium |
| Construction Type | Fin and Tube | Fin and Tube (Ultrasonic Welding) | Fin and Tube | Fin and Tube |
| Header Material | T2 Copper | Copper TP2 | T2 Copper | Copper TP2 |
| Header Tube Size(mm) | Φ25 × 1060 × 0.6 × 2pcs | Φ25 × 1060 × 0.6 × 2pcs | Φ25 × 1060 × 0.6 × 2pcs | Φ25 × 1060 × 0.6 × 2pcs |
| Rise Material | T2 Copper | Copper TP2 | T2 Copper | Copper TP2 |
| Rise Tube Size(mm) | Φ10 × 1886 × 0.5 × 8pcs | Φ10 × 1886 × 0.5 × 8pcs | Φ10 × 1886 × 0.5 × 8pcs | Φ10 × 1886 × 0.5 × 8pcs |
| Fill Capacity | 1.8L Including Header Pipe | 1.8L Including Header Pipe | 1.6L Including Header Pipe | 1.8L Including Header Pipe |
| Thermal Insulation |
| Insulation Material | Rook Wool (back) | Rook Wool (back) | Rook Wool (back) | Rook Wool (back) |
| Polyurethane(side) | Polyurethane(side) | Polyurethane(side) | Polyurethane(side) |
| Insulation Thickness | 40mm(back)/25mm(side) | 50mm(back)/30mm(side) | 40mm(back)/25mm(side) | 50mm(back)/30mm(side) |
|
| Conductivity(W/mK) | ≤0.032 under 75°c | ≤0.042 under 75°c | ≤0.032 under 75°c | ≤0.032 under 75°c |
| Casing |
| Frame | Aluminium alloy | Aluminium alloy | Aluminium alloy | Aluminium alloy |
| Frame Color | Bronze color | Bronze color | Bronze color | Bronze color |
| Back Plate | 0.3mm Galvanized Steel | 0.3mm Galvanized Steel | 0.5mm Galvanized Steel | 0.5mm Galvanized Steel |
| Max Operation Temperature | 180°c | 200°c | 180°c | 200°c |
| Maximum Pressure(Mpa) | 0.6 | 1.4 | 0.6 | 1.4 |
| Sealing Gasket | EPDM | EPDM | EPDM | EPDM |
| Limitation of Operation |
| Max.Working Temperature | 120°c | 120°c | 120°c | 120°c |
| Max.Working Pressure | 0.5Mpa | 1.2Mpa | 0.5Mpa | 1.2Mpa |
| Recommended Circulation Flow | Water | Propylene glycol&water mixture | Water | Propylene glycol&water mixture |
| Resistance to Freezing | ≥0°c | ≥-40°c | ≥0°c | |
FAQ:
Technical support: We offer design and installation instruction
with 10 years installation experience.
OEM: Your LOGO information can be made on our Flat Plate Panel
Solar Collector and carton boxes.
Packaging & Shipping
Packaging Details: Export strong corrugated carton outside with
foam protection inside.
Delivery Time: 10 - 15 days for container order quantity upon
confirmed invoice or sales contract.
Our Service
--Fast response: Your inquiry will be replied within 24 hours via
e-mail or online messenger;
--Technical support: You have more than 10 years experience for
product research, installation guidance, market analysis, etc.
--OEM & ODM: We welcome OEM & ODM requirements for solar collector,
storage tank, installation frame, and even for some out-sourcing
equipment;
--Sample checking: In spite of quality control in production,
samples will be selected and installed to check prior to delivery;
--Minimum order quantity: We offer sample sample manufacturing for
customers to check the quality and service;
--Shipping service: We offer to arrange goods shipment to abroad
ocean port or inland site, and if necessary to make goods
insurance, customs clearance, etc;
--Import certificates: We offer to make Certificate Origin CO, FORM
A, FORM E, FORM F, customs certification, etc.
