Slope Roof High Efficiency Pressurized Heat Pipe Thermal Solar
Collector For Solar Thermal Heating
Description:
Solar heater, solar water heater, solar hot water heater, solar
water heater system, solar water heater project, solar collector,
evacuated tube solar collector, vacuum tube solar collector, heat
pipe solar collector
| Overall Height | 185mm |
| Overal Width | 1475mm |
| Overal Length | 1985mm |
| Aperture Area | 1.68m² |
| Gross Area | 2.88m² |
| Peak Heat Output | 1233w |
Evacuated tube solar collectors are suitable for both residential
and commercial applications.
The design of the solar collector is a culmination of nearly 10
years of feedback from installers and solar professional all over
the world and aims to meet their requirements.
Working Principle:
Step 1: The absorber coating on the inner glass tube absorbs
sunlight and converts it into heat.
Step 2: Steam forms inside heat pipe which transfers heat rapidly
up to the manifold.
Step 3: A pump circulates water or heat transfer fluid through the
header pipe, carrying heat back to the storage tank. Gradually
throughout the day the tank is heated up.
Product Specifications & Details:
Model: Heat Pipe Solar Collector
Flow channel: Material of TP2, 0.9MM in thickness
Head box: Aluminum alloy
Insulation layer: Rock wool/ PU layer
Heat pipe: 24mm for condensor, material of TU1 copper
Frame: Aluminum sheet 1.8mm
Vacuum tube: QB-CU-AL-NAL-58*1800, 10, 12, 15,18, 20, 24, 25, 30
tubes
Silicon ring: High polymer silicon rubber
Solar collectors for water material specification:
| Description | pressurized solar collector |
| Material of out manifold | Aluminum Alloy |
| Material of inner tank | Copper Header Pipe |
| Inlet and outlet hole | Male G3/4 |
| Max pressure | 0.6 Mpa |
| Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
| Thickness of glass tube | 1.6mm |
| Vacuum tube tightness | P≤0.005 Pa |
| Absorption | as=0.93-0.96(AM1.5) |
| Emission ratio | εh=0.04-0.06(80C±5C) |
| Idle sunning property parameters | Y=220~260m2.C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
| Bracket: | Aluminum Alloy/ Galvanized Steel |
| Welding: | Argon arc welding |
| Fastening pieces: | Made of stainless steel screw |
Specification of vacuum tube:
| Item No. | Specification |
| Qty. of solar tubes | Diameter of solar tube | Length of solar tube | Absorber area | Dimension |
| PT125-1800/58-15 | 15pcs | Ø 58mm | 1.8M | 1.2 | 1060*2000 |
| PT125-1800/58-20 | 20pcs | Ø 58mm | 1.8M | 1.6 | 1410*2000 |
| PT125-1800/58-30 | 30pcs | Ø 58mm | 1.8M | 2.4 | 2110*2000 |
Tips
· Considering the economics of a solar water heating system
· Evaluate your site's solar resource
· Determine the correct system size
· Determine the system's energy efficiency
Packaging & Delivery
Packaging Details:
1. Standard export packing for FCL order.
2. Special packing for LCL order.
Delivery Detail:
10-15 days after receipt of deposit.
