CE Approved Rock Wool CPC Super Heat Pipe Solar Collector Pressured
High Temperature
Solar collector working principle:
1. The heat pipe series solar collector are always connected with
existing heating supply device.
2. The selective coating on the inner Cover of the evacuated tubes
converts solar energy into heat energy and transfers heat to the
heat pipes by aluminum fins.
3. The liquid in the heat pipe changes into vapour which rises to
the condenser.
4. The heat then passes through the heat exchanger and the vapour
becomes liquid, returning to the base of the heat pipe.
5. The heat conducts to the heat transfer liquid (anti-freezing
liquid or water) via a copper pipe.
6. This transference of heat into the liquid creates a continuous
circulation as long as the collector is heated by the sun.
Solar collector specification:
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2. Mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm
4. Insulation layer: 45mm thickness glass fiber /polyurethane layer
5. Heat preservation: 72-96hrs
6. Hail resistance: 25mm
7. Max pressure: 6 bar
8. Coating of vacuum tube: Ss-c/cu
9. Frame: 2.0mm thickness Aluminum Alloy
Solar collector applications:
1. Hotels, resorts, hospitals and hostels
2. Process industry, boiler feed, laundry and canteens
3. Agricultural sector, hatcheries and dairies
4. Process industry, Boiler feed, Laundry and canteens
5. Agricultural sector, hatcheries, and dairies
6. Swimming pool heating
7. In-process heating
8. Health clubs (Steam / Sauna)
| Technical Data of solar collector |
| Description | solar collector |
| Numbers of tube(pcs) | 15 |
| Absorber area approx.(m2) | 1.425 |
| Hydraulic Connections | G3/4" male thread |
| Fluid volume(L) | 1.0 |
| Maximum operation pressure(Bar) | 6 |
| Test pressure(Bar) | 9 |
| Heat transfer fluid | Anti-freeze Fluid (Water-Glycol) |
| Max.working temp. | 250C |
| hot water(L/Day) | 200 |
| ΔT | 35C (Radiation>=800w/m2.day) |
| Collector efficiency | 76.4% |
| Medium | Pure water |
| Start-up Temperature of heat pipe | <=30C |
| warranty | 5 years |
Solar collector system specification
| Flow type | Heat pipe |
| Heat pipe material | TU1 copper |
| Heat pipe size | Top: Ø14* 1mm; Body: Ø8* 0.6mm thickness |
| Tube diameter | φ47/1500mm or φ58/1800mm |
| Solar vacuum glass tube | High boron-silicon |
| Coating of absorber on glass tube | Al-N-Al,Copper,Stainless steel |
| fins around heat pipe | single long Aluminum(1.68m) |
| Manifold pipe material | TU1 copper (Ø35x0.8mm) |
| Manifold casing material | Aluminum alloy(2.0mm) |
| Insulation material in manifold casing | Glass fiber |
| Thickness of insulation(mm) | 45 |
| Density of insulation (kg/m3) | 90 |
| Frame material | Aluminum alloy frame(2.0mm) |
| Sealing Materials | EPDM |
Heat pipe technical data
| Item | Measured value |
| Heat conduction coefficient | >99% |
| Axial heat transition quantity | 0.93-2.49kw/cm² |
| Heat conduction speed | >200mm/s |
| Axial temperature difference | 1-2centi-degree/m |
| Starting temperature | 20centi-degree |
| Starting speed | 2min |
| Working temperature range | 30centi-degree~300centi-degree |
| Resistance to high temperature | No deformation in 48hours under 250C high temp condition |
| Resistance to low temperature | -35C |
| Life | >10years |
Notes:
1. The goods are on the basis of FOB Shanghai terms or CIF.
2. Term of the payment: 100%T/T in advance for LCL.
30% T/T in advance,balance 70% after the receipting the copy of the
B/L.
3. Delivery time is 15 days for full container.
4. Package:all goods are in cartons for full container ,samples
will be in plywood case.
5. MOQ:Negotiation.
Packaging & Delivery
Packaging Details:
1. Standard export packing for FCL order.
2. Special packing for LCL order.
Delivery Detail:
10-15 days after receipt of deposit.
