50 Tubes Stainless Steel Manifold Vacuum Tube Solar Collector for
Swimming Pool Project
Specifications
solar collector
Easy to use, also convenient to install
Environmental friendly
Non pressurized solar collector
We provide Solar Water Heater, Water Heater, solar collector,Hot
Water Heater, solar hot water, Solar Water Heaters, solar energy
heater,Solar Energy Water Heater, Solar Heat Collector, Hot
Collector, Solar Water, pressurized solar heater, Solar Products.
Working principle of low pressure solar heater
adopt the alternative absorption coating to absorb the solar
energy,
heat the water in the vacuum tube directly, through the cold hot
water convection.
change the solar energy into heat energy to store in the water
tank:
a) Adopts the double-deck highly special hard glass tube of boron
silicon.
b) Double-deck glass coaxial structure, intermediate layer releases
the vacuum, maintains 5 x 10-2Pa high vacuum for a long time while
in charge.
c) Magnetism accuse of alternative absorption coating, AL / N / AL
of sputter aluminum nitrogen aluminum alternative absorption
coating solar radiation absorption rate ≥93%, and hot emittance
≤6%.
d) Long performance life: 15 years.
e) Endures climate feature: thermal efficiency is good in the whole
year.
Data
1) inner manifold: stainless steel SUS304-2B
2) outer manifold:PVDF
3) Glass tube dimensions: 47mm x 1.5m x 25 pcs
4) Heat preservation: 72hrs
5) Hail resistance: 25mm
| Non-pressurized Solar Water Heater TECHNICAL DATA |
| WATER STORAGE TANKS SPECIFICATION |
| Material of out tank | High quality Painted steel/ Stainless steel. |
| Material of inner tank | Food grade SUS304-2B stainless steel. |
| Tank insulating layer | Imported polyurethane can conserve the heat for maximum 72 hours |
| Inlet and outlet hole | Male G 1/2 |
| Tank size | 420,460,470,475,480,500mm or Customer demand |
| Welding: | Argon arc welding |
| EVACUATED VACUUM TUBES SPECIFICATION |
| Tube structure | All-glass double deck co-axial structure |
| Glass material | High borosilicate 3.3 glass |
| Outer tube dia. & thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm |
| Inner tube dia.& thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm |
| Tube size | 58*1800mm |
| Absorptive coating property | Structure | AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN |
| Sediment method | Single target or Three targets - magnetron sputtering plating |
| Specific absorption | 0.90-0.93(AM1.5) / 0.93-0.96(AM1.5) |
| Emission ratio | 0.05-0.075(800C±50C) / 0.04-0.06(800C±50C) |
| Solar irradiation for obtaining a preset water temperature | Φ=58 H≤4.7MJ/m² | H=4.1-4.4MJ/m² / H=3.7-4.2MJ/m² |
| Vacuum tightness | 5.0×10¯³ Pa |
| Idle sunning property parameters | 220-260 m².C/KW / 260-300 m².C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(M2.0C) / ULT=0.4~0.6W/(M2.0C) |
| Resistant Hail | ≤25mm |
| Useful life | 15 years |
| BRACKET |
| Bracket: | Stronger galvanized steel / Stainless steel/aluminium alloy |
| Bracket angle: | 0,18,22,38,45 optional, pitched roof, flat roof optional. |
| Fastening pieces: | Made of zinc-coated stainless steel.. |
| MODEL No. | Tube Size | Tube No. | Tank Capacity | System Capacity | Aperture Area | Volume | Load Qty 20GP/40HQ |
| Dia.*L | ( m2 ) | (m3) | (sets) |
| PT-58-10 | 58*1800mm | 10 | 89 | 119 | 0.93 | 0.38 | 80/191 |
| PT-58-12 | 58*1800mm | 12 | 105 | 141 | 1.11 | 0.45 | 67/159 |
| PT-58-15 | 58*1800mm | 15 | 129 | 174 | 1.39 | 0.55 | 54/127 |
| PT-58-18 | 58*1800mm | 18 | 137 | 185 | 1.67 | 0.66 | 45/106 |
| PT-58-20 | 58*1800mm | 20 | 154 | 208 | 1.86 | 0.71 | 40/96 |
| PT-58-24 | 58*1800mm | 24 | 203 | 275 | 2.23 | 0.85 | 33/80 |
| PT-58-30 | 58*1800mm | 30 | 251 | 341 | 2.79 | 1.04 | 27/64 |
| PT-58-36 | 58*1800mm | 36 | 300 | 408 | 3.34 | 1.22 | 22/53 |
Warranty:
6 years international responsibility for U pipe solar collector and
15 years for vacuum tubes due to original quality problems.
Payment term:
1. T/T 30% Deposit in advance and balance should be paid after
receiving the B/L copy.
2. L/C at sight (if your quantity reaches 5*40’ HQ container)
3. Sample order or LCL: we accept western union and one touch
business.
Packaging & Delivery
Packaging Details:
Export carton for full container.
Delivery Detail:
7 days after receiving the deposit.
