Aluminum profile sliding window accessories Aluminum Window
Profiles
Specifiaction:
| Description | Aluminum profile sliding window accessories China factory |
| Material Thickness(t) | t=1.0 / 1.2 / 1.4 |
| Material | Aluminum Alloy 6063, 6061 |
| Annealing Treatment | T5,T6 |
| Color | Green, Grey, Black, White, (RAL series)etc. |
| Surface Treatment | Mill finish, anodized, powder coated, electrophoresis, sand balsting etc.and depend on customer’s demand. |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile; 2. Wrap with shrink film exterior; 3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical performances to adapt all kinds of architectural styles |
Chemical composition
| Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti |
| 6063 | 0.2~0.6 | 0.45~0.90 | <0.35 | <0.10 | <0.10 | <0.10 | <0.10 | <0.10 |
| | | | | | | | |
| 6061 | 0.4~0.8 | 0.80~1.2 | <0.70 | 0.15~0.4 | <0.15 | <0.25 | 0.04~0.35 | <0.15 |
| | | | | | | | |
Equipment
| Production lines | 22 |
| Anodizing and electrophoresis | 4 |
| Powder Coating | 2 |
| Wood Grain | 4 |
| Painting | 1 |
| Polishing | 1 |
| Brushing | 1 |
| Supply ability | 6000Tons per month |
Certificate
1: Guangdong famous brand
2: The ISO9001 quality management system certification
3: ISO14001 environmental management system certification
4: OHSMS18001 occupational health and safety management system
certification,etc.
Typical use of aluminum alloy
1145: Packaging and adiabatic aluminum foil, heat exchanger
1199: Electrolytic capacitor foil, optical reflective deposition
film
1350: Electric wire, conducting strand, bus, transformer strip
2011: Screws and mechanical processing products requiring good
cutting performance
2014: Apply to situations where high strength and hardness
(including high temperature) are required. Aircraft heavy,
forgings, plank and extrusion materials, wheel and structural
elements, multi-stage rocket first-stage fuel tank and spacecraft
parts, truck frame and suspension system parts
2017: Is the first industrial application of 2XXX series alloy, the
current application scope is narrower, mainly for rivet, general
mechanical parts, structure and transportation tool structural
parts, propeller and accessories
The variety, status and typical USES of aluminum alloy
7 series aluminum alloy, aluminum alloy with zinc as the main
elements belong to the heat treatment can be reinforced aluminium
alloy. Add magnesium alloy, Al - zinc - Mg alloy, alloy has good
heat deformation performance, a wide range of quenching under the
condition of appropriate heat treatment can obtain higher strength,
good welding performance, general corrosion resistance is good,
have a certain amount of stress corrosion, is the aluminum alloy
high strength, weldable. Al - zinc - Cu alloy is based on Al - zinc
- Mg alloy by adding Cu, its strength is higher than 2 is aluminium
alloy, generally called super-high strength aluminum alloy, the
alloy of yield strength to tensile strength, showed high, than the
intensity is high, but low plasticity and high temperature
strength, should be done at room temperature, 120 the following
bearing structure, using alloy easy processing, good corrosion
resistance and high toughness. These alloys are widely used in
aviation and spaceflight, and become the most important structural
materials in the field of it. The current production 7 series
aluminum alloy grades: 7003 7005 7046 7075
