NLOS COFDM Transmitter 2.4GHz Wireless TDD-COFDM Ethernet
Transmitter Receiver
Specification Sheet
User Manual
Introduction:
ST2410CO TDD-COFDM transceiver adopts advanced time division
processing, TDD bidirectional network transmission and the leading
COFDM modulation technology combined, providing complete
bi-directional encryption (supports AES_128 encryption) network
data transmission channel, as well as anti multi path, high speed
mobile data and voice.
H.264 code technology as the core, assigning channel resources
through slot control, through the sub-carrier frequency flexibly
assigned to multiple user terminals, within the same frequency
maximized realized access multiple end users multiple access
Can realize real-time two way transparent information transmission
under the condition of NLOS and high speed movement.
Multiple wireless networks can be integrated with each other layout
into large network coverage
Features:
- Provide up to 12Mbps of data flow, dynamic adaptive rate allocation
technology
- Smart settings, simple operation, easy to use
- Supports transparent PTP and PTMP network technology
- Safety with AES 128 bit, can set user’s password
- Supports non line of sight (NLOS) high-speed mobile transmission
- Provide standard RS-232 and RS-485 + RJ45 Ethernet
- Transmit/receive video audio, data and other multimedia signals
simultaneously Supports high standards of Industrial and level
applications
- Small volume, light weight, easy to carry, the radiating aluminum
casing
- High clear OLED digital display
| Modulation |
| Frequency Range | 2405-2470MHz(Adjustable), Adjust wavelength 1Mhz on LCD |
| Frequency Channel | TDD |
| Modulation | COFDM |
| Bandwidth | 4/8MHz adjustable on LCD |
| Output power | 100mW-1W adjustable |
| Encryption | AES 128-bit encryption, manually enter KEY code |
| System |
| Transmission mold | Full-Duplex/ Half-duplex |
| Transmission Protocol | standard TCP / IP , transparent transmission, serial asynchronous
data |
| Data Type | 10/100Bate-T Ethernet, industry RS-232, RS-422-RS485 standard |
| Analog audio | Customized analog audio input connector |
| Transmission rate | 2Mbps～12Mbps |
| Transmission delay | 10～30ms |
| Networking mode | Point to Point, Point to Multi Point |
| Error Rate | ≤10-6 |
| Transmission distance | Horizontal on gound: 1-10km (LOS), Air to ground: 8-20km,
Horizontal on sea 10-30km(LOS) |
| Receiving sensitivity | -99dBm |
| Receiving mode | Omni |
| Application | Portable , aerial photography , aerial operation , short distance
data transmission |
| Physical interface |
| Ethernet interface | RJ45 |
| RS-232/422/485 | Six pin terminal blocks |
| Power Input | Six pin terminal blocks |
| Audio input interface | Standard 3.5 audio interface |
| RF interface | SMA Female |
| Other |
| Power supply | DC7-17V |
| LCD | LCD to display and adjust the parameters
After 4.5 minutes to automatically turn off the LCD to save power |
| Equipment Color | Black |
| Dimension | 75*51*22mm (L×W×H) |
| Weight | 120g |
Application:
As its miniature volume, precision design, lightweight and easy to
carry, it’s suitably used in short distance and long range air high
speed wireless video data transmission purposes. Such as UAV,
rotorcraft, micro UAV, drone, UGV, unmanned powered parachute,
unmanned underwater vehicles boats, fire-fighting robot, unmanned
ship, airship, USV, high iron, EMU, unmanned vehicles, unmanned
vehicle and more.
Data transmission.
