​Easy Handling EEG Helmet Brainwave Sensor Cap With Ag / AgCl Sintered Electrodes

Absence Seizure EEG Brainwave Sensor Cap With Ag / AgCl Sintered Electrodes And Common Connector

Description:

Spontaneous activity is measured on the scalp or on the brain and is called the electroencephalogram. The amplitude of the EEG is about 100 μs when measured on the scalp, and about 1-2 mV when measured on the surface of the brain. The bandwidth of this signal is from under 1 Hz to about 50 Hz.see follow figure.

Features:

Advantages:

Conductive surface of Ag/AgCl sintered electrode is increased in 6 times. It allows to achieve: -stable electrical contact; -low impedance 0.0 kOhm.

Easy of adding a conductive gel due to a 25% increase hole in the electrode.

Excellent fit of the electrodes to head and durability of the cap due to the high isotropic elasticity of new textile material.

The additional protection of wires allows using EEG cap during long-term monitoring without elastic net bandage.

Better comfort for patient due to a new miniature ear adapter.

The indelible printing marks applied to each electrode allow to change a textile base of the cap by dint of detaching of the electrode system and install it on the new cap the same size.

Specification:

cleaning:

Immediately after removing electrodes, wipe off excess paste and clean by rinsing or briefly soaking in distilled or deionized water.

Besdata Technology Co., Ltd is professional in supplying EEG electrodes, EEG caps, EEG conductive gels and pastes. In addition, We also provide standard and private label products, and customized medical accessories on behalf of or together with third parties.
Besdata® EEG electrodes are made of a variety of electrode materials( Gold coated, Pure Silver, Silver/Silver chloride, Sintered Silver chloride) to meet different demands, we transmit stable and clean signals for precise EEG measurements.
Unicare Silver/Silver chloride cup electrode is unique high quality, made of pure silver and coated with silver chloride. has a very low DC offset potential, minimal motion artifact and good low frequency EEG response. Can be used many dozens of times and maintain their quality performance characteristics. Even if the layer of silver chloride is worn out, it would never influence the stability of the measurement.
Besdata® Sintered Sliver Chloride is preferred for precise neural signal detection. It provides top-of-the-line performance, being excellent for DC and low frequency EEG
Besdata® EEG-caps offer up to 128 electrodes of various electrode materials to meet the needs of both researchers and clinicians, we could offer 20, 32, 64 and 128 channel as standard, Meanwhile with customized channels to order.

Besdata® EEG conductive Gels and Pastes has been specially formulated for using with EEG caps and Electrodes. It provides skin preparation and conductivity which dramatically lower electrode-skin impedance, quickly stabilizing measurement, much more easy and convenient to use than the other.

Besdata® are continually expanding our capabilities to realize the unlimited possibilities of capturing electrical signals of brain, even the human body.
And we are always looking for new opportunities to expand our network, Step by Step.